View Full Version : 2017 Mafia Meet Maintenance Thread
danewilson77
08-05-2017, 10:49 AM
Guys,
Please use this thread so we can plan the maintenance day on Sunday, October 22nd.
Thank you
danewilson77
08-05-2017, 10:49 AM
Name / Maintenance Item / Need Tools?
1. DW77 / Replace Vortex Disipator / No
2.
az3579
08-05-2017, 11:28 AM
I need to replace my flux capacitor.
That and provide coding services.
Sent from my Pixel using Tapatalk
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
Oli77
09-21-2017, 05:42 PM
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
ELCID86
09-22-2017, 01:48 AM
...and recharge my flux capacitor/ No
Why not just get the plug in one?
https://uploads.tapatalk-cdn.com/20170922/3b5943fa300a15ded256407e04c09fa9.gif
slater
09-22-2017, 04:12 AM
Why not just get the plug in one?
https://uploads.tapatalk-cdn.com/20170922/3b5943fa300a15ded256407e04c09fa9.gif
LOL. my wife bought me that one for christmas last year. it's hilarious.
Oli77
09-22-2017, 07:21 PM
Good one Shawn.
holyc0w
10-03-2017, 08:22 PM
Name / Maintenance Item / Need Tools?
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
holyc0w
10-11-2017, 06:16 PM
*crickets*
I removed the headlight shroud, as that seems better for a home project.
danewilson77
10-12-2017, 10:59 AM
Name / Maintenance Item / Need Tools?
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes pleaseGot you covered on tools holyc0w
Sent from my S8+
holyc0w
10-12-2017, 11:03 AM
Thanks boss
Newjack
10-12-2017, 11:21 AM
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark install
704sw
10-12-2017, 11:58 AM
Anyone coming have a bushing tool for the rear control arm bushings?
Anyone coming have a bushing tool for the rear control arm bushings?
I have one! Just need to find it.
Note: changing those greatly effects rear alignment and may result in bad tire wear on the way home.
Sent from my iPhone using Tapatalk
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark install
6. San / replace low beam headlight bulbs and possibly paint lower grill black / No
Sent from my iPhone using Tapatalk
danewilson77
10-18-2017, 10:42 AM
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark installI do not have the correct battery charger and don't want to risk bricking your dme. Bring if you have.
Sent from my S8+
Anyone coming have a bushing tool for the rear control arm bushings?
I have one! Just need to find it.
Note: changing those greatly effects rear alignment and may result in bad tire wear on the way home.
Sent from my iPhone using Tapatalk
Bump!
Do you need me to bring this???
Sent from my iPhone using Tapatalk
Newjack
10-18-2017, 01:26 PM
I do not have the correct battery charger and don't want to risk bricking your dme. Bring if you have.
Sent from my S8+I think my dad has one but I'm not sure the amperage, I've read it needs to be at least 10 amps to work depending on how old the battery is. Will probably replace my battery when I'm there as well since it's already 6 years old and I don't want to get stranded one day.
What charger do you have?
Sent from my Nexus 5X using Tapatalk
holyc0w
10-18-2017, 01:34 PM
I think my dad has one but I'm not sure the amperage, I've read it needs to be at least 10 amps to work depending on how old the battery is. Will probably replace my battery when I'm there as well since it's already 6 years old and I don't want to get stranded one day.
I believe it's at least 10 amps and then it's higher if the angel eyes are on. I have one, but I dropped it shortly after my shark injection...and have yet to check into getting it inspected.
Newjack
10-18-2017, 01:36 PM
I believe it's at least 10 amps and then it's higher if the angel eyes are on. I have one, but I dropped it shortly after my shark injection...and have yet to check into getting it inspected.I have angel eyes, but I think it's fairly easy to just unplug them for a minute while I do the install. Been a while since I've installed the angel eyes
Sent from my Nexus 5X using Tapatalk
az3579
10-19-2017, 04:02 AM
Do we have provisions for an oil change?
I'm over 15k on this oil change... not that it matters because I've changed my oil twice over just in top ups. lol
Still need to do it though..
danewilson77
10-19-2017, 06:57 AM
Do we have provisions for an oil change?
I'm over 15k on this oil change... not that it matters because I've changed my oil twice over just in top ups. lol
Still need to do it though..Yes. Provisions on hand.
Sent from my S8+
704sw
10-19-2017, 08:12 AM
Bump!
Do you need me to bring this???
Sent from my iPhone using Tapatalk
Sorry, Guy. I didn’t get an alert you’d quoted me. Don’t worry about it, I’ll do those when I do the subframe.
The thing I need help with more than anything is drilling out a broken mounting bolt on my passenger seat. I don’t think the HPDE instructor would be thrilled knowing his seat only has 3 points of contact.
Sorry, Guy. I didn’t get an alert you’d quoted me. Don’t worry about it, I’ll do those when I do the subframe.
The thing I need help with more than anything is drilling out a broken mounting bolt on my passenger seat. I don’t think the HPDE instructor would be thrilled knowing his seat only has 3 points of contact.
No problem! We’ll see Y’all tomorrow.
Sent from my iPhone using Tapatalk
az3579
10-19-2017, 09:47 AM
Yes. Provisions on hand.
Sent from my S8+
Sweet, thanks.
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark install
6. San / replace low beam headlight bulbs and possibly paint lower grill black / No
7. az3579 / Oil change
704sw
10-19-2017, 09:56 AM
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark install
6. San / replace low beam headlight bulbs and possibly paint lower grill black / No
7. az3579 / Oil change
8. 704sw / drill out broken bolt, check tranny mount nut tightness, reset airbag light / yes if available (for bolt extraction)
danewilson77
10-19-2017, 02:06 PM
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark install
6. San / replace low beam headlight bulbs and possibly paint lower grill black / No
7. az3579 / Oil change
8. 704sw / drill out broken bolt, check tranny mount nut tightness, reset airbag light / yes if available (for bolt extraction)Who has the airbag reset tool now!! !?
Sent from my S8+
az3579
10-19-2017, 02:14 PM
Who has the airbag reset tool now!! !?
Sent from my S8+
I have the software that can clear the light, if that's what you mean...
danewilson77
10-19-2017, 03:30 PM
I have the software that can clear the light, if that's what you mean...Excellent
Sent from my S8+
Newjack
10-19-2017, 03:49 PM
Excellent
Sent from my S8+https://i.ytimg.com/vi/YKUOB8MN4Kc/hqdefault.jpg
Sent from my Nexus 5X using Tapatalk
az3579
10-19-2017, 04:00 PM
I should probably throw it out there:
I have ISTA-D, ISTA-P, NCS, INPA, WinKFP, and E-Sys, for those who want any particular computer-related services done.
Sent from my Pixel using Tapatalk
danewilson77
10-19-2017, 05:02 PM
I should probably throw it out there:
I have ISTA-D, ISTA-P, NCS, INPA, WinKFP, and E-Sys, for those who want any particular computer-related services done.
Sent from my Pixel using TapatalkIf you could just bring the program that'll make my ZHP run like it has 20K miles, that'd be great.
Sent from my S8+
az3579
10-19-2017, 05:11 PM
If you could just bring the program that'll make my ZHP run like it has 20K miles, that'd be great.
Sent from my S8+
https://media.tenor.com/images/3f59e47524bcc4e3244bb09f89d7705d/tenor.gif
holyc0w
10-19-2017, 06:22 PM
:rofl
Does anyone know how to adjust the door hinges?
BMWCurves
10-19-2017, 11:16 PM
:rofl
Does anyone know how to adjust the door hinges?
Have you used the tried and true method?
https://i.imgur.com/3dXPZDL.gif
holyc0w
10-20-2017, 04:37 AM
Have you used the tried and true method?
https://i.imgur.com/3dXPZDL.gif
Maybe something like this?
http://www.soyouthinkyoucanwrite.com/wp-content/uploads/2017/01/car-door-gif.gif
Sheepdog84
10-20-2017, 08:39 AM
I should probably throw it out there:
I have ISTA-D, ISTA-P, NCS, INPA, WinKFP, and E-Sys, for those who want any particular computer-related services done.
Sent from my Pixel using Tapatalk
I think my zhp could benefit from this, as it suffers from the 2.8k RPM stutter... As far as i know, the software has never been updated.
Will you be hanging out for maintenance day?
Oli77
10-21-2017, 11:14 AM
Still planning to come up and have some time to chat with the mafia and hold some tools.
Had the shop do the radiator and expansion tank while I was out of town.
I installed my strut bar from UUC (thanks Abe; Zhpabe89) and I installed my autodim mirror a while back (thanks msbc721). I will not need any tools.
See you dudes tomorrow at Dane's.
danewilson77
10-21-2017, 11:22 AM
Still planning to come up and have some time to chat with the mafia and hold some tools.
Had the shop do the radiator and expansion tank while I was out of town.
I installed my strut bar from UUC (thanks Abe; Zhpabe89) and I installed my autodim mirror a while back (thanks msbc721). I will not need any tools.
See you dudes tomorrow at Dane's.Sounds good
:thumbsup
Sent from my S8+
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.