Comparison Photos Please

[GotZHP]

Hello Mafia,

Was hoping you guys could help me out by posting a few photos for me to compare. I've realized I have reconstructed the car in the wrong order. I need to get the car ready for the hood to go on next Monday, so that is my weekend project. Was hoping people could post pictures like the ones i've posted and of the bottom of the hood where the latch is.

Gotta figure this out and I know some parts need to go below the front panel and not on top of it. Need to take the bumper off once again.

Thanks in advance.
2713127132

[3ZHP]

This is what I have with me. I can get you more in the morning if needed.

http://uploads.tapatalk-cdn.com/20160916/379620583b24477112a6d6be1f27c27f.jpg

http://uploads.tapatalk-cdn.com/20160916/59654b02d0d7a37b42492412aa440b72.jpghttp://uploads.tapatalk-cdn.com/20160916/59654b02d0d7a37b42492412aa440b72.jpg


Sent from my iPhone 6S using Tapatalk

[slater]

Hello Mafia,

Was hoping you guys could help me out by posting a few photos for me to compare. I've realized I have reconstructed the car in the wrong order. I need to get the car ready for the hood to go on next Monday, so that is my weekend project. Was hoping people could post pictures like the ones i've posted and of the bottom of the hood where the latch is.

Gotta figure this out and I know some parts need to go below the front panel and not on top of it. Need to take the bumper off once again.

Thanks in advance.

looks like you're missing the hood 'levelers' on the outer holes of the rad support, as well as the hood latch bits - but those look like you should be able to slide them in from underneath (through the grille openings under the intake scoop), so that should be a 10-minute affair.

i can get you some more dissected photos of the hood latch stuff if you need them, as my parts car is minus lights and a bumper right now.

[Karl Lazlo]

Nice toes.

http://i485.photobucket.com/albums/rr216/Karl_Lazlo/Public/20160831_121506_zpsbeqsg1fu.jpg (http://s485.photobucket.com/user/Karl_Lazlo/media/Public/20160831_121506_zpsbeqsg1fu.jpg.html)

[GotZHP]

looks like you're missing the hood 'levelers' on the outer holes of the rad support, as well as the hood latch bits - but those look like you should be able to slide them in from underneath (through the grille openings under the intake scoop), so that should be a 10-minute affair.

i can get you some more dissected photos of the hood latch stuff if you need them, as my parts car is minus lights and a bumper right now.

Haha thats why I asked for the photos. I have all the parts in a pile behind the driver's seat.

Going on the car today. Going to have to take the front end apart some to get the hood latches in place. Plus it appears i am missing two fasteners, and I put the hood bump stops in the wrong spot.

Gonna get it all sorted out now

[GotZHP]

Thanks All!

Hood goes on Monday afternoon!

[GotZHP]

looks like you're missing the hood 'levelers' on the outer holes of the rad support, as well as the hood latch bits - but those look like you should be able to slide them in from underneath (through the grille openings under the intake scoop), so that should be a 10-minute affair.

i can get you some more dissected photos of the hood latch stuff if you need them, as my parts car is minus lights and a bumper right now.

Unfortunately, the way the front air duct pieces is built and attached, it'll have to come out. It is not a soft enough plastic to bed. O well, it is held in by a rather small number of fasteners.