View Full Version : 255's on an 8" rim?
danewilson77
03-26-2011, 09:56 AM
What would be the negative affects of putting a 255/35/18 tire on an 18x8 rims.
Also.....is it possible?
danewilson77
03-26-2011, 10:05 AM
The other half of the question is I am running a 245/35/18 in the rear right now. What would the effects be if I decided to go with a 245/40/18 in rear....and I would plan to keep fronts at 225/40/18.
Thanks
Gheybe
03-26-2011, 10:32 AM
Imagine the tire.... But thicker.
The problem with running a 255 on an 8 inch wheel I that your tire will sit wider than the rim. Problems with that is that it will be a bit more prone to rolling as the wall of the tire will be stretched over the outside. The rubber will have more travel if you will.
mimalmo
03-26-2011, 10:33 AM
Rubbery handling.
danewilson77
03-26-2011, 10:39 AM
ok......I think I'm gonna go with the Yokohama AVID ENVigor from Tirerack. Do 225/40/18 in front, and 245/40/18 in rear. We'll see what happens.
I knew the side wall was the concern here, but wanted to here waht you guys had to say.
Mike V
03-26-2011, 12:22 PM
Don't you have 8" all around? Why not put the same size tire up front?
danewilson77
03-26-2011, 12:29 PM
Money, and then it wouldn't be staggered, and it won't fit.
mimalmo
03-26-2011, 12:35 PM
I vote square. Even if that means 235's all around.
Mike V
03-26-2011, 01:11 PM
With a square setup, you'll see a handling improvement (less understeer). My old M3 had 17x7.5 with 225/45 and 17x8.5 with 245/40 and when I went to 8.5 with 245s all around, the handling was noticeably more neutral.
az3579
03-26-2011, 05:21 PM
With a square setup, you'll see a handling improvement (less understeer). My old M3 had 17x7.5 with 225/45 and 17x8.5 with 245/40 and when I went to 8.5 with 245s all around, the handling was noticeably more neutral.
This. Square setup = win.
danewilson77
03-26-2011, 05:39 PM
So...if I went 235's all around, then used spacers to tweak, that would kind of defeat the purpose...correct?
Droid! Srs Legitness!
vteckiller2000
03-26-2011, 07:49 PM
It's funny to see how people with cars that have staggered wheels want to go square, and people who's cars come square want to go staggered...
/offtopic
Gheybe
03-26-2011, 10:08 PM
You can fit 245's up front.
If i can fit 255's all over the place, you can do it with 245.
vteckiller2000
03-26-2011, 10:09 PM
I got a set of 19's last week. 245's on the front with a 35 offset, so you should be able to run the stock front with a 255 just fine.
danewilson77
03-27-2011, 05:53 AM
It's funny to see how people with cars that have staggered wheels want to go square, and people who's cars come square want to go staggered...
/offtopic
I have staggered, and I want staggered....but I am taking everyones advice and am thinking about it.
Droid! Srs Legitness!
danewilson77
03-27-2011, 05:54 AM
You can fit 245's up front.
If i can fit 255's all over the place, you can do it with 245.
No....no I can't.
Droid! Srs Legitness!
danewilson77
03-27-2011, 06:00 AM
I got a set of 19's last week. 245's on the front with a 35 offset, so you should be able to run the stock front with a 255 just fine.
I have ET 42 and am lowered significantly.....
I don't have a stock front
I don't have a stock wheel.
Droid! Srs Legitness!
Mike V
03-27-2011, 11:48 AM
I have staggered, and I want staggered....but I am taking everyones advice and am thinking about it.
Droid! Srs Legitness!
Curious... why would you want staggered?
danewilson77
03-27-2011, 11:58 AM
But it looks better. That is all. I think I'm gonna go 235's all around though.
vteckiller2000
03-27-2011, 11:58 AM
I would think with moar lowering, and more positive offset than me, you would have more tuck and be able to fit it. By my math, with 255's you should have 2mm less poke than I do, and I don't rub in front ever.
danewilson77
03-27-2011, 12:09 PM
I have one index finger of clearance. I just checked. This is not only to edge fender well......but also near top of arc on tire...
bullfrogs_M3
03-27-2011, 12:21 PM
I am running 235's up front and 255's in the rear. No rubbing in the rear. Of course, I also had my alignment shop do -1.0(i think it was one, maybe just under -1.0) camber on the rear wheels to pull them in a hair. So they sit and go up and down well within the rear arches. ie: No rubbing if you can pull camber on the rears with 255.
danewilson77
03-27-2011, 12:32 PM
The offset on those BBS is prolly ET 38?
bullfrogs_M3
03-27-2011, 01:04 PM
ET 35's
danewilson77
03-27-2011, 02:50 PM
ET 35's
Ok....
Droid! Srs Legitness!
Mike V
03-27-2011, 10:33 PM
But it looks better. That is all. I think I'm gonna go 235's all around though.
I agree that it looks better... on a 911. :)
kaboom
03-30-2011, 10:40 AM
I vote square. Even if that means 235's all around.
Same here. Remember a 255 on an 8 won't have any more contact patch than a 235 on an 8, and will feel very sloppy.
Ian
danewilson77
03-30-2011, 11:52 AM
Same here. Remember a 255 on an 8 won't have any more contact patch than a 235 on an 8, and will feel very sloppy.
Ian
I got 235's all the way around. Thanks.
Droid! Srs Legitness!
kaboom
03-31-2011, 06:19 AM
Great choice man!
danewilson77
03-31-2011, 08:45 AM
Great choice man!
Boom! Winning! In this case Quad-Winning!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.