PDA

View Full Version : Rear bumper trim cover separating at leading edge



Dual
07-20-2016, 10:04 AM
Has anyone had experience with an issue like this? Likely cause/fix?

26535

26536

Many thanks in advance.

Vas
07-20-2016, 10:22 AM
Looks like the clip is missing there.

Dual
07-20-2016, 10:36 AM
Could be, although there is something visible there which doesn't show up well on the photo. I am having trouble reading the RealOEM to get information as to what sort of clip that is. Is there access to that part from the wheel well or do I have to pull the bumper?

Dual
07-20-2016, 10:41 AM
26537

rguti153
07-20-2016, 10:50 AM
Is the metal clip I think I'm starting to have the sag too on my rear bumper

Sent from my SM-G935V using Tapatalk

az3579
07-20-2016, 10:52 AM
That clip helps hold it up. You will need to loosen the rear bumper, slide it off a bit, and slide it back on to correct it.

Dual
07-20-2016, 11:09 AM
Thank you. Slide the clip off?

IKBB
10-12-2016, 01:26 PM
easy fix, remove the bumper from clip, and push the clip upward into the quarter, then bend it slightly away from the vehicle, then the bumper will wedge into it and stay put.

Dual
10-12-2016, 02:02 PM
Thanks!