Zaks
03-08-2016, 08:37 PM
I installed this a few days ago and wanted to share some photos and videos for comparison. My stock shifter was very loose due to some dumbass in the past putting a piece of wire around the edge of the selector rod instead of a circlip. I replaced all the shifter parts (bushings, seals, etc) when doing the SSK so it feels great now. I did have to trim the selector rod slightly as it was hitting the driveshaft, but that was pretty quick and easy with a Dremel.
In any case, below is the link to flickr with a bunch of photos and a couple of videos comparing the stock vs understeer shifters.
https://www.flickr.com/photos/130074049@N07/albums/72157665064642570
In any case, below is the link to flickr with a bunch of photos and a couple of videos comparing the stock vs understeer shifters.
https://www.flickr.com/photos/130074049@N07/albums/72157665064642570