(Sold) Brand new real carbon fiber splitters

[BumpinAlpine]

I purchased these splitters as part of the last group buy that was established here.

There is a brand new, never mounted set of real carbon fiber splitters for the M Tech II bumpers that were made by a manufacturer in Europe. They look fantastic and weigh practically nothing.

Some priorities have changed since I placed an order back in June, so I'm trying to get what I paid for them back.
Just trying to get back what I paid for them.
$200 shipped within USofA

220022200022001

[BMWCurves]

Any pics? GLWS

[BumpinAlpine]

Pictures uploaded

[danewilson77]

Purty

Sent from my SM-G925V using Tapatalk

[BMWCurves]

How do these attach, screws?

[BumpinAlpine]

I think screwed in from the bottom would be the most secure way to attach them.

[Sockethead]

Three screws from the bottom. You can use double sided tape along the top if you want but not necessary. When you go to mount them, it will be obvious where to drill the holes for the screws. I recommend using stainless steel screws and washers

[az3579]

Three screws from the bottom. You can use double sided tape along the top if you want but not necessary. When you go to mount them, it will be obvious where to drill the holes for the screws. I recommend using stainless steel screws and washers
One of the previous owners drilled into my bumper for splitters. I still want to hurt them badly for it...

sent from my Droid Turbo

[Sockethead]

Where I drill them isn't visible but I'm sure that would still affect you OCD :)

[Technoman]

These are awesome, I have a set. Three screws from the bottom and I added 3m tape at the top as well but it isn't really necessary. Now if I could get my wife to avoid curbs I would be happier...

Bump for a great product..

[Sockethead]

Now if I could get my wife to avoid curbs I would be happier...

This is why I bought an extra pair.... Except it's me doing it :shifty

[BumpinAlpine]

bump

[BumpinAlpine]

ttt

[CarbonZHP]

Have you checked them for fitment? My splitters are in need of replacement but they never fit well in the first place.

[BumpinAlpine]

I've pressed them on there and taped them on to see how they look, they seem to line up just fine, just need a secure mounting bolt from the bottom and some double tape from the inside.

[CarbonZHP]

The outside edges of mine never fit correctly. Even after having 2 shops look at them. Far edges were off more than 5mm. If these fit I may be interested.

[SwiftyM3]

My lower drivers side is jacked up.. these would cover that right up nice. If only I hadn't blown the budget by ~2k recently on projectors and maintenance. If these are still for sale much longer I'm sure i'll have a week moment and make you an offer. ;(

[BumpinAlpine]

I can hold them up to the bumper and take a picture so you can see how they fit.

[Sockethead]

Maybe these will help... Hard to get a good pic with my car jammed in the garage... These have been on my car for a couple of years now.

http://images.tapatalk-cdn.com/15/11/12/8be45203fbaf7c169edb870181dfa672.jpghttp://images.tapatalk-cdn.com/15/11/12/e1135f641468eb1a931e703bc08d1567.jpg

The fit is excellent and these are all CF, not CF overlay over the cheap club sport replicas that fit like crap.

[BCS_ZHP]

Rob, Do I see 2 LSD equipped cars on the left, starting the boys young, huh?!!
Bruce

[johnrando]

I'll take 'em. I wouldn't mind an extra set. PM'd you.

[Sockethead]

Rob, Do I see 2 LSD equipped cars on the left, starting the boys young, huh?!!
Bruce
LOL yea that's an X5 and i8 but that's a story for another day haha

[johnrando]

Sold.

[BumpinAlpine]

Sold to mr rando.

[johnrando]

PM'd you. Do you have shipping information?