Question about reprogramming the temperature gauge using PA Soft

[94LSXS10]

I've searched and can't seem to find any reason why my values are different than the ones posted here http://forum.e46fanatics.com/showthread.php?t=1013600

I'm in the IKE section and the 0x0F0 section does not match either the factory or revised one listed. I made a backup and changed it to the revised line anyways, nothing seemed to change. While I was searching I came across a PA Soft for dummies post and noticed that one of the pictures half way through the first post matches mine. http://forum.e46fanatics.com/showthread.php?t=1067835

Does anyone have any idea why mine is different, am I looking in the wrong area possibly?

Factory is listed as 0x0F0: 0F 00 32 1F 4B 5A 73 7C 94 7D A4 06 0E 1E 0F
Revised is listed as 0x0F0: 0F 00 41 1F 4B 5A 64 7C 94 73 A4 06 0E 1E 0F

Here is mine that matches the second link I posted above.
21277

[94LSXS10]

Looks like I didn't read far enough. Post #80 has the answer for this situation. http://forum.e46fanatics.com/showthread.php?t=1013600&page=4 Time for a quick break from work to test this out :)

[BMWCurves]

I'd have to double check, but in a lot of those reprogram threads, the authors were referencing pre-facelift cars which I think had different stock values than facelifted cars. I'm planning on reprogramming mine soon and I found the gauge visualizer/hex generator software that an e46fanatics user made, and you have to select pre-facelift or facelift and it outputs different stock hex values.

[94LSXS10]

I'd have to double check, but in a lot of those reprogram threads, the authors were referencing pre-facelift cars which I think had different stock values than facelifted cars. I'm planning on reprogramming mine soon and I found the gauge visualizer/hex generator software that an e46fanatics user made, and you have to select pre-facelift or facelift and it outputs different stock hex values.

That was the problem, I thought I had a pre-facelift car all along............Hi, my name is Jim and I'm a BMW noob. lol.

After changing the Hex generator to "FL" and looking at lines 0x340 and 0x350 in the "IKE" it all makes sense now

[Shenanigans]

Anyone know what kind of chip you are actually reprogramming?

PS, I've never looked into programming a car before so forgive me if my question is dumb.

Edit. I see it's an eeprom, so I guess I'm more interested in know what chip is using the data on the eeprom and where it's located.

Sent from my Nexus 4 using Tapatalk

[johnrando]

Moved into our BMW coding section for future reference. Glad you got it worked out.

[danewilson77]

Moved into our BMW coding section for future reference. Glad you got it worked out.
Thanks JR.

Sent from my SM-G925V using Tapatalk