2015 Mafia Family Reunion Maintenance Thread

[danewilson77]

Guys,

I'd like to get an idea of what maintenance everyone plans to do on maintenance day, June 7th. Please reply no later than May 21st with your plan. Thanks

The maintenance day will be held at Guys Son-in-law house (Ted). He's got a very well set up 3 bay garage.

His address is:
3230 Riverside Dr
Mason, OH 45040

http://images.tapatalk-cdn.com/15/05/16/19b079070b47fa9aa077c9b77491a360.jpg

http://images.tapatalk-cdn.com/15/05/16/8afd7f5616ac970905e2ed09ddce23a2.jpg

http://images.tapatalk-cdn.com/15/05/16/5fc1c6d16762ca74b255ec88d34e02c9.jpg

USERNAME - JOB
1. Danewilson77 - Vanos
2.

[UdubBadger]

:thumbup

[Oli77]

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder

[mbeckel]

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
You have the tough job Oli

Sent from in the bushes

[NoVAphotog]

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), possible Stud Conversion if I don't get to it beforehand

[san]

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), possible Stud Conversion if I don't get to it beforehand
4. San - ccv (will it be possible to finish?)


Sent from my iPhone using Tapatalk

[UdubBadger]

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), possible Stud Conversion if I don't get to it beforehand

Dane is the only one with the ability to convert any of us into studs...

[cakM3]

Dane is the only one with the ability to convert any of us into studs...

That's because he's a submarine sailor :thumbsup

[ELCID86]

That's because he's a submarine sailor :thumbsup

Good one Charlie! I hope to do Vanos before I get there as I'm not sure it'd be wise to do it in the middle of the trip. This is for Sun morning?


Thumbs, iPhone, Tapatalk.

[Oli77]

I will just come, absorb the knowledge, become a stud and perhaps ask around for help with my bumper :inserdumbassheadslap

[danewilson77]

:rofl

[UdubBadger]

FYI I will be scheduling shoots for Sunday morning so if you have signed up for a package with me I'd suggest either making sure you get a slot on Friday/Saturday (limited amount of time for these) with me or else doing the shoot BEFORE you pull your car apart on Sunday ;)

[ELCID86]

Seth, where are you doing the shoot(s)?

[UdubBadger]

Depends what day the person schedules for.

Friday I can do a dusk/night shoot while we are all meeting up or outside around town as people are getting drinks.

Saturday I can do likely only one or a quick 2 after cars & coffee (maybe leave a little early from it) around downtown Cincy. Then Dane set some time aside for another sunset or night shoot after our cruise.

Sunday I don't plan on doing maintenance so I'm available to shoot first thing in the morning before everyone else has their car pulled apart. I will likely stick around until the mid afternoon or dinner time then head back to Chicago. I assume we will find locations around Danes or wherever we are doing the maintenance day.




GoingHAM mobile

[danewilson77]

The maintenance day will be held at Guys Son-in-law house (Ted). He's got a very well set up 3 bay garage.

His address is:
3230 Riverside Dr
Mason, OH 45040

http://images.tapatalk-cdn.com/15/05/16/19b079070b47fa9aa077c9b77491a360.jpg

http://images.tapatalk-cdn.com/15/05/16/8afd7f5616ac970905e2ed09ddce23a2.jpg

http://images.tapatalk-cdn.com/15/05/16/5fc1c6d16762ca74b255ec88d34e02c9.jpg

[ELCID86]

Wow.


Thumbs, iPhone, Tapatalk.

[danewilson77]

Wow.


Thumbs, iPhone, Tapatalk.
I knew you guys would appreciate it. Added benefit: We can grill out :)

[BMWCurves]

Wow.


Thumbs, iPhone, Tapatalk.

+1 Short of having lifts, that's a dream garage to me.

[fredo]

That's a REALLY neat place.

[alexandre]

I'm gonna do rear pads and sensor and full e brake service.

[UdubBadger]

sounds good D

[danewilson77]

I'm gonna do rear pads and sensor and full e brake service.
Please add name to list.

[alexandre]

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), possible Stud Conversion if I don't get to it beforehand
4. San - ccv (will it be possible to finish?)
5. Alex - rear brake pads + full ebrake service

[san]

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), possible Stud Conversion if I don't get to it beforehand
4. San - ccv + cdv delete (will it be possible to finish?)
5. Alex - rear brake pads + full ebrake service

Edit: added cdv delete to my list


Sent from my iPhone using Tapatalk

[NoVAphotog]

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, front pad swap.
4. San - ccv + cdv delete (will it be possible to finish?)
5. Alex - rear brake pads + full ebrake service

Edit: Changed it up. Will be doing stud conversion next weekend so I can run the spacers for the photos. :thumbsup

[cakM3]

Edit: Changed it up. Will be doing stud conversion next weekend so I can run the spacers for the photos. :thumbsup

You will love the stud conversion Dan!
:like

[danewilson77]

You will love the stud conversion Dan!
:like
+1

[NoVAphotog]

You will love the stud conversion Dan!
:like


+1

Thanks guys! Looking forward to it. 90mm bulletnose TMS studs, with TMS 12.5mm spacers front and rear. Might need to add a little fender rolling to the list, but we'll see.

How do you the parking brake adjustment after installing the studs? Or should I do it next weekend as well beforehand?

[cakM3]

Dan, if you can get some fender rolling action done while you're there I highly recommend you doing this. There will be lots of people there who can help you get this done! :thumbsup

[3ZHP]

Looks like I'll be there for most of the day so, if anyone needs an extra hand, feel free to ask. I also have a fair amount of tools and could pack some. Just let me know. If anyone's interested in replacing their RCAB, I do have the tool.


Sent from my iPhone using Tapatalk

[Stu]

I've been trying to paint my brakes, but to no avail due to how much rust has built up over the years it has lived in NH. I don't have a good place to do media blasting, and a wire wheel just isn't cutting it (pun intended). Does anyone have a media blaster, or a compressor with enough CFM to do it? I can get the blaster + media if need be.

Edit: I could also pick up an N55 adapter and do a walnut blast

I also want to try and identify a very annoying rattle/squeak from my driver's side A pillar. It only occurs going downhill, which is bizarre to say the least.

Looking forward to hanging with you all again!

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, front pad swap.
4. San - ccv + cdv delete (will it be possible to finish?)
5. Alex - rear brake pads + full ebrake service
6. Stu - Painting brakes, walnut blast

[danewilson77]

Surprised I see no desire to fender roll in here. Oh well. So be it. Continue to whip the 4 wheelers if you must.

[ELCID86]

If I drive I will. Most likely riding with Dan who might.


Thumbs, iPhone, Tapatalk.

[danewilson77]

Ok. Add to the list so I make sire to bring the roller.

[UdubBadger]

Surprised I see no desire to fender roll in here. Oh well. So be it. Continue to whip the 4 wheelers if you must.

I don't need it but if someone wants to do it for me I'll pick up the tab on their lunch. I have no desire to learn how so whatever.

[NoVAphotog]

Surprised I see no desire to fender roll in here. Oh well. So be it. Continue to whip the 4 wheelers if you must.

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, brake fluid flush/possible pad swap, fender roll w/ Dane and/or people that know how to do it. :thumbsup
4. San - ccv + cdv delete (will it be possible to finish?)
5. Alex - rear brake pads + full ebrake service
6. Stu - Painting brakes, walnut blast

[danewilson77]

How does walnut blasting occur?

[ryankokesh]

How does walnut blasting occur?

+1

[danewilson77]

I mean....I actually know how walnut blasting occurs, but how does it occur in somebody's garage vice a legit shop?

[Just_George]

Daniel, I have a Motive power bleeder I can bring along if you need it...maybe you already have this covered? Happy to bring it if needed, let me know.

[NoVAphotog]

Daniel, I have a Motive power bleeder I can bring along if you need it...maybe you already have this covered? Happy to bring it if needed, let me know.

Sounds good! :thumbsup

I'd appreciate it (even though I should pick one up, but figure another good lesson and experience using one first will be good). .

I'll be bringing along fluid (ATE Type 200) and front pads (switching from the posi-quiets...thinking of going back to OEM). We'll see, interested in others opinions on the faint rubbing I'm getting on my front passenger side, hence the "brake/inspection" element.

[UdubBadger]

I mean....I actually know how walnut blasting occurs, but how does it occur in somebody's garage vice a legit shop?

yeah wondered that as well...

[ryankokesh]

yeah wondered that as well...

+1

[Stu]

yeah wondered that as well...

Hopper + compressor that delivers 4CFM @ 90PSI. Harbor Freight has a really good mobile media blaster hopper. Remove intake manifold, blast away. If there's a powerful enough air compressor, it's doable, but I'd need to get the special intake manifold adapter. It's a "maybe," but I definitely want to clean up my brakes and paint them.

http://c1552172.r72.cf0.rackcdn.com/289832_x600.jpg

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, brake fluid flush/possible pad swap, fender roll w/ Dane and/or people that know how to do it.
4. San - ccv + cdv delete (will it be possible to finish?)
5. Alex - rear brake pads + full ebrake service
6. Stu - Painting brakes, walnut blast (maybe?)

[danewilson77]

Cool.

[ryankokesh]

Cool.

+1

[az3579]

Since I failed to replace them yesterday and probably won't have time to do them this week, I need to add my name to the list:

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, brake fluid flush/possible pad swap, fender roll w/ Dane and/or people that know how to do it.
4. San - ccv + cdv delete (will it be possible to finish?)
5. Alex - rear brake pads + full ebrake service
6. Stu - Painting brakes, walnut blast (maybe?)
7. az3579 - Sway bar end links (front), repaint parcel shelf

[Oli77]

Considering doing my rear shocks. I will need help given that I have never done them. Not exactly sure what to buy either. I plan on buying the top mounts as well. Doable?

[az3579]

Considering doing my rear shocks. I will need help given that I have never done them. Not exactly sure what to buy either. I plan on buying the top mounts as well. Doable?

I just did my rear shock this past Friday. I was scared because I have never done them before. It turned out to be easy peasy. I can bring my ramps if you wish... the wheels don't even have to come off.

[ryankokesh]

Yup, easy peasy. Happy to help as well.


Sent from my iPhone

[ELCID86]

Yup, easy peasy. Happy to help as well.


Sent from my iPhone

+1


Thumbs, iPhone, Tapatalk.

[Just_George]

Considering doing my rear shocks. I will need help given that I have never done them. Not exactly sure what to buy either. I plan on buying the top mounts as well. Doable?

Rear shocks are a piece of cake....I think adding the reinforcement plates at the top is a good idea, not sure how others feel. They're cheap, and good insurance. Either way, definitely replace the mounts.

[ryankokesh]

Agree


Sent from my iPhone

[danewilson77]

Rear shocks are a piece of cake....I think adding the reinforcement plates at the top is a good idea, not sure how others feel. They're cheap, and good insurance. Either way, definitely replace the mounts.



Agree


Sent from my iPhone

+1

Sent from my Samsung Galaxy S6 Edge

[az3579]

Updated my entry to include spraying rear parcel shelf.

[Johnmadd]

Updated my entry to include spraying rear parcel shelf.

You don't like navy blue?

[ELCID86]

You don't like navy blue?

More like Prince's raspberry beret.


Thumbs, iPhone, Tapatalk.

[az3579]

You don't like navy blue?


More like Prince's raspberry beret.


Thumbs, iPhone, Tapatalk.
I like neither of these things. Lol

[Oli77]

Thanks for you help guys. I will get my stuff together and order the parts. BP, I don't have ramps so that would be helpful.

[alexandre]

Parts ordered and ez-pass topped up! Starting to get excited for the 13h drive :thumbsup

[NoVAphotog]

Updated my entry to include spraying rear parcel shelf.

:like

Fully approve. More folks should add this and get the paint!

I'll bring my leftover can of Dupli-Color Vinyl & Fabric paint. Idk how much is left, but should be enough for speaker grills and/or the cabin air filter cover ;)

[san]

Removed the ccv from my list and added sub frame inspection, from the boot side by removing all the trim...

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, brake fluid flush/possible pad swap, fender roll w/ Dane and/or people that know how to do it.
4. San - subframe inspection + cdv delete
5. Alex - rear brake pads + full ebrake service
6. Stu - Painting brakes, walnut blast (maybe?)
7. az3579 - Sway bar end links (front), repaint parcel shelf


Sent from my iPhone using Tapatalk

[Oli77]

Changed post to indicated rear shocks.

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder and doing my rear shocks.
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, brake fluid flush/possible pad swap, fender roll w/ Dane and/or people that know how to do it.
4. San - subframe inspection + cdv delete
5. Alex - rear brake pads + full ebrake service
6. Stu - Painting brakes, walnut blast (maybe?)
7. az3579 - Sway bar end links (front), repaint parcel shelf

[danewilson77]

Bump

Sent from my Samsung Galaxy S6 Edge

[brettbimmer]

Plan to be there to assist, hold someone's beer, or otherwise get in the way for a while anyway. :ineedabeer

[NoVAphotog]

USERNAME - JOB
1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder and doing my rear shocks.
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, brake fluid flush, fender roll w/ Dane and/or people that know how to do it, mystery item installation
4. San - subframe inspection + cdv delete
5. Alex - rear brake pads + full ebrake service
6. Stu - Painting brakes, walnut blast (maybe?)
7. az3579 - Sway bar end links (front), repaint parcel shelf

EDIT: Added a "mystery" item to install (if it gets here in time). Hint: It exists in several Imola sedans.

[ELCID86]

mystery item installation ... :ninja :thumbsup

[Oli77]

I might could be tempted to do a CDV delete as well.
I will need some convincing.

[ryankokesh]

I might could be tempted to do a CDV delete as well.
I will need some convincing.

Someone could totally do this for me! ;)


Plan to be there to assist, hold someone's beer, or otherwise get in the way for a while anyway. :ineedabeer

I'll help you get in the way... I'm pretty experienced in that art. I can't hold anyone's beer though... it'll disappear. :dunno


:like

Fully approve. More folks should add this and get the paint!

I'll bring my leftover can of Dupli-Color Vinyl & Fabric paint. Idk how much is left, but should be enough for speaker grills and/or the cabin air filter cover ;)

Mine's still black somehow :fingerscrossed

[NoVAphotog]

Mine's still black somehow :fingerscrossed

Where was your car from?

[Stu]

Scored some free tickets at work for the Memorial Golf Tournament + hospitality tent on Sunday. I definitely don't wanna miss that, so I'm off the list.

1. Danewilson77 - Vanos
2. Oli77 - Looking over Dane's shoulder and doing my rear shocks.
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, brake fluid flush, fender roll w/ Dane and/or people that know how to do it, mystery item installation
4. San - subframe inspection + cdv delete
5. Alex - rear brake pads + full ebrake service
6. az3579 - Sway bar end links (front), repaint parcel shelf

[ryankokesh]

Where was your car from?

Tulsa/Texas, but I'm guessing it was tinted pretty early in its life


Sent from my iPhone

[danewilson77]

***Read the entire paragraph. Focus on the "NOT"***

I know this is kind of late breaking, but can I get an approximate head count on those coming to maintenance day but are NOT performing maintenance on their vehicles? Thanks peeps.


#/Username/real name/# attending
1. danewilson77 Dane Wilson 1
2.

Sent from my Samsung Galaxy S6 Edge

[ELCID86]

#/Username/real name/# attending
1. danewilson77 Dane Wilson 1
2. Elcid86/ Shawn /1 (will be with Daniel=one car). Plan to leave mid to late a.m.

[Just_George]

#/Username/real name/# attending
1. danewilson77 Dane Wilson 1
2. Shawn 1 (will be with Daniel=one car). Plan to leave mid to late a.m.
3. Just_George David Richardson 1

Willing to help on any/all projects!

[danewilson77]

Awesome guys. I'd just like to give Ted a heads up for who's going to be at his house Sunday.

Sent from my Samsung Galaxy S6 Edge

[brettbimmer]

#/Username/real name/# attending
1. danewilson77 Dane Wilson 1
2. Elcid86/ Shawn /1 (will be with Daniel=one car). Plan to leave mid to late a.m.
3. Brettbimmer/ Brett /1 (Happy to lend a hand or two where needed, no plans for maintenance unless I break something on the 500+ mile drive to OH.)

[3ZHP]

I'll be there most of the day lending a had to anyone that needs help.

[ryankokesh]

#/Username/real name/# attending
1. danewilson77 Dane Wilson 1
2. Elcid86/ Shawn /1 (will be with Daniel=one car). Plan to leave mid to late a.m.
3. Brettbimmer/ Brett /1 (Happy to lend a hand or two where needed, no plans for maintenance unless I break something on the 500+ mile drive to OH.)
4. ryankokesh / Ryan Kokesh / 1 (also leaving mid to late am)



Sent from my iPhone

[UdubBadger]

#/Username/real name/# attending

1. danewilson77 Dane Wilson 1

2. Elcid86/ Shawn /1 (will be with Daniel=one car). Plan to leave mid to late a.m.

3. Brettbimmer/ Brett /1 (Happy to lend a hand or two where needed, no plans for maintenance unless I break something on the 500+ mile drive to OH.)

4. ryankokesh / Ryan Kokesh / 1 (also leaving mid to late am)

5. Badger / Seth / 1 leaving late AM / early afternoon

[danewilson77]

Edited mine.


1. Danewilson77 - Need BP to code my rear fogs and fix my "drivers side window roll down" that resulted after the last coding session.
2. Oli77 - Looking over Dane's shoulder and doing my rear shocks.
3. NoVAphotog - R/R HVAC Blower Motor (w/ Alex's guidance), brake/overall inspection with input from others, brake fluid flush, fender roll w/ Dane and/or people that know how to do it, mystery item installation
4. San - subframe inspection + cdv delete
5. Alex - rear brake pads + full ebrake service
6. az3579 - Sway bar end links (front), repaint parcel shelf

Sent from my Samsung Galaxy S6 Edge

[UdubBadger]

Anyone wanna swap my headlight lenses? I break stuff every time I try to get in there.

[Oli77]

I did mine twice on each side and it always went smoothly. I can give it a try in exchange for a CDV delete?

[ryankokesh]

I did mine twice on each side and it always went smoothly. I can give it a try in exchange for a CDV delete?

Trust me, you don't want Seth deleting anything of yours... :ducking


Anyone wanna swap my headlight lenses? I break stuff every time I try to get in there.

Me too...not touching that shit.



Sent from my iPhone

[3ZHP]

Clean for Maintenance Day currently under way.
http://images.tapatalk-cdn.com/15/06/04/4833f98a56719eae489ff7e659e4a3cb.jpg


Sent from my iPhone using Tapatalk

[danewilson77]

Damn Guy. The last time I was over there I would have eaten off the floor. How dirty could it have been?

Sent from my Samsung Galaxy S6 Edge

[brettbimmer]

Anyone wanna swap my headlight lenses? I break stuff every time I try to get in there.

Um...are they same as sedan lenses, or are they needing a bake first prior to removal per traditional ZHP coupes? If it's the same as the sedans, it should be fairly easy. (Famous last words...)

Can't be any more fun than this...

20040

[Vas]

Dealer will be doing maintenance to my car this Saturday. Rather be with you guys. Take pics please

[UdubBadger]

Trust me, you don't want Seth deleting anything of yours... :ducking



Me too...not touching that shit.



Sent from my iPhone

He's an a-hole but he's right which is why I make him do all my dirty work.

[UdubBadger]

Um...are they same as sedan lenses, or are they needing a bake first prior to removal per traditional ZHP coupes? If it's the same as the sedans, it should be fairly easy. (Famous last words...)

Can't be any more fun than this...

20040

Same as sedan. Pulling out the little plastic eyelid thingies gets me every time tho. Surprised they're still attached to the car.

[brettbimmer]

Same as sedan. Pulling out the little plastic eyelid thingies gets me every time tho. Surprised they're still attached to the car.
Ah, the more you know! Shouldn't be too bad then bud. Haha, yea eyelid thingies can be fun sometimes but not as bad as trying not to drop the difficult to reach mounting bolts for the entire assembly. It's usually the last one that I drop after already installing the other three, then I have to remove them for access and start again...

[danewilson77]

Seth, if you've already broken the clips on the lower trim piece, install will be a breeze.

Sent from my Samsung Galaxy S6 Edge

[UdubBadger]

Lol true

[ryankokesh]

Lol true

Don't forget to pack your duct tape. I have some zip ties you can borrow.

[Just_George]

Just a long-shot, but I brought along a GAS DISA rebuild kit in case anybody needs to do that...

[UdubBadger]

Don't forget to pack your duct tape. I have some zip ties you can borrow.

I knew I forgot something

[Oli77]

Omw from Lexington.

[ryankokesh]

The maintenance day will be held at Guys Son-in-law house (Ted). He's got a very well set up 3 bay garage.

His address is:
3230 Riverside Dr
Mason, OH 45040

http://images.tapatalk-cdn.com/15/05/16/19b079070b47fa9aa077c9b77491a360.jpg

http://images.tapatalk-cdn.com/15/05/16/8afd7f5616ac970905e2ed09ddce23a2.jpg

http://images.tapatalk-cdn.com/15/05/16/5fc1c6d16762ca74b255ec88d34e02c9.jpg

Address bump


Sent from my iPhone

[ryankokesh]

Early start!

20129


Sent from my iPhone

[3ZHP]

Full House!
http://images.tapatalk-cdn.com/15/06/07/7b8a413ffeb59d27f0421e2811e6a192.jpg

http://images.tapatalk-cdn.com/15/06/07/77a2323126d0393ca38d20f8894acf6b.jpg


Sent from my iPhone using Tapatalk

[Vas]

Thumbs up

[ELCID86]

20131

20132


Thumbs, iPhone, Tapatalk.

[3ZHP]

The projects continue!



Sent from my iPhone using Tapatalk

[3ZHP]

http://images.tapatalk-cdn.com/15/06/07/4563fdca216054c5c7772d6269920cf4.jpg

http://images.tapatalk-cdn.com/15/06/07/6b0bd83491f0ff519edac73363bd5c60.jpg


Sent from my iPhone using Tapatalk

[WOLFN8TR]

DAM Look at that garage!! Looks like a nice day for maintenance.

[cakM3]

I'm glad to see many are taking full advantage of maintenance day! :thumbsup Next year I plan to be there with everyone (at the reunion meet that is)!

[Sockethead]

We're on our way back to NJ and the kids. 60 miles from Wheeling WV

http://images.tapatalk-cdn.com/15/06/07/b5fceb1aa206b78326b9e2a3540bd3fa.jpg

Bummed I'm missing maintenance day but looking forward to seeing the twins...

[Oli77]

Made it back to Lexington, but not without the P2231 code kicking on a few times (thanks ultragaugeII). I'll dig into that latter.

Thanks to Shawn and Guy and all who helped me with the rear shocks. Special thanks to Shawn who took that pesky CDV out.

Car felt more solid in the rear and gear changes are 230.23 ms faster!

Beautiful cars and good times indeed. Please thank Ted and his wife again for opening their house and cooking out.

Thanks ZHPBOSS! Pleasure meeting all.

Safe travel to all, specially the Quebecois who have a long journey ahead.

[UdubBadger]

Only rubbed twice on the way home!

The harder dampened tears felt AWESOME too putting the car through the highway paces.

Lights make the front end look brand new. Thanks for the help guys!

[ELCID86]

Made it back to Lexington, but not without the P2231 code kicking on a few times (thanks ultragaugeII). I'll dig into that latter.

Thanks to Shawn and Guy and all who helped me with the rear shocks. Special thanks to Shawn who took that pesky CDV out.

Car felt more solid in the rear and gear changes are 230.23 ms faster!

Beautiful cars and good times indeed. Please thank Ted and his wife again for opening their house and cooking out.

Thanks ZHPBOSS! Pleasure meeting all.

Safe travel to all, specially the Quebecois who have a long journey ahead.

Happy to have helped. Thanks for coming over. It was nice to put a face with the name.



Thumbs, iPhone, Tapatalk.

[3ZHP]

Made it back to Lexington, but not without the P2231 code kicking on a few times (thanks ultragaugeII). I'll dig into that latter.

Thanks to Shawn and Guy and all who helped me with the rear shocks. Special thanks to Shawn who took that pesky CDV out.

Car felt more solid in the rear and gear changes are 230.23 ms faster!

Beautiful cars and good times indeed. Please thank Ted and his wife again for opening their house and cooking out.

Thanks ZHPBOSS! Pleasure meeting all.

Safe travel to all, specially the Quebecois who have a long journey ahead.

No problem, glad to help.

[NoVAphotog]

Can't resist another thank you post! Alex and Shawn, thank you for killing the crickets and finally giving those 10 year old hamsters a break! Brett, BP, Dane, Dave, Guy and Ted thank you for WRANGLING with the Stett boots, assistance and hosting during the install of the "mystery item."

20154

20155

20156

It sounds incredible.

20157

20158

[alexandre]

Can't resist another thank you post! Alex and Shawn, thank you for killing the crickets and finally giving those 10 year old hamsters a break! Brett, BP, Dane, Dave, Guy and Ted thank you for WRANGLING with the Stett boots, assistance and hosting during the install of the "mystery item."

20154

20155

20156

It sounds incredible.

20157

20158

Must've been hard to keep it under 4k rpm on the drive back. I remember when I installed mine, I think my MPG took a 25% dive because the sound was so intoxicating!

[johnrando]

:like

[NoVAphotog]

Must've been hard to keep it under 4k rpm on the drive back. I remember when I installed mine, I think my MPG took a 25% dive because the sound was so intoxicating!
Yup! Down to 19mpg...can't resist pressing the pedal harder!

Sent from an HTC One