Simmsled
03-21-2015, 01:53 PM
PROBLEM: EML comes on ONLY when attempting to accelerate briskly from a stop.
No other lights come on. Throttle still works, but lags big time. It also does not allow full throttle, maybe just less than half.
Connected BMW Scanner... The following code is what was pulled. It is the same code that keeps popping up every so often. This happens maybe 3 or 4 times in a year. Turn off, and on again... No problems.
DTC, hex[dec]
27F7 [10231] Pedal input poti1 ...another translation of the 27F7 is "27F7 Pedal travel sensor, potentiometer 1 signal "
I have found a pdf that highlights how this works... a great read. I feel pretty confident now that the pedal needs to be replaced.
http://www.ge39.com/files/m54x5.pdf Pages 11-13 are most relevant to the pedal and throttle body.
I have searched as much as I can about this, and the threads are all pretty inconclusive. The OP normally just disappears after complaining.
So... I'm about to order the pedal.
Has anyone else had to replace the pedal?
Thoughts?
Thanks!
No other lights come on. Throttle still works, but lags big time. It also does not allow full throttle, maybe just less than half.
Connected BMW Scanner... The following code is what was pulled. It is the same code that keeps popping up every so often. This happens maybe 3 or 4 times in a year. Turn off, and on again... No problems.
DTC, hex[dec]
27F7 [10231] Pedal input poti1 ...another translation of the 27F7 is "27F7 Pedal travel sensor, potentiometer 1 signal "
I have found a pdf that highlights how this works... a great read. I feel pretty confident now that the pedal needs to be replaced.
http://www.ge39.com/files/m54x5.pdf Pages 11-13 are most relevant to the pedal and throttle body.
I have searched as much as I can about this, and the threads are all pretty inconclusive. The OP normally just disappears after complaining.
So... I'm about to order the pedal.
Has anyone else had to replace the pedal?
Thoughts?
Thanks!