P0302 cyl 2 misfire

[Washburn]

So car started rough and CEL on
Turned car off and back on: runs and idles almost normal but CEL still on
Adv Auto parts checked codes and got p0302
Cyl 2 misfire - they didn't clear code.
Most posts I read say replace coil pack
Should I start with that ?
Where's the best place to get one?
I am assuming I can DIY this unless special tools needed

Car has been sitting a lot lately and weather has been very cold and also add coolant light was on and I added coolant this morning and all seems ok in that front - I know it's not related but just thought I'd mention it ( this was before the SES came on )

Car has 47k miles so far and this is the first ever CEL

Any advice / feedback is welcome and appreciated



Sent from my NOT bent iPhone 6 using Tapatalk

[ELCID86]

I just put 6 new ones in my car. I was getting the same code (w/ 186k mi). Let me know if you want to try one of my old coils.


Thumbs, iPhone, Tapatalk.

[Washburn]

Thanks man! I am going to try swapping the suspected one onto a different cyl and see what happens but I will def keep your offer in mind just in case - I find it so strange that this happened at such low mileage


Sent from my NOT bent iPhone 6 using Tapatalk