PDA

View Full Version : Spec E46 General Chat Thread



Hornung418
07-28-2014, 07:49 PM
So I've been getting the itch to build a car for 2015 or 2016 season. The e46 is a chassis I know a lot about and it's pretty much at it's lowest depreciation value.

Share your thoughts on this new series devoted to the beloved e46 330. If you are already involved, feel free to chime in with pictures and videos and information about your build!!

Home page: http://spece46.com/

Rules: http://cerient.net/spece46/se46rules.pdf

I'm really pumped to get into it and I'm hunting for any 330 from 2002-2006 in good shape and a manual transmission. I'd use my ZHP...but they're not allowed. :(

Please post in this thread with any information about the series, cars for sale, parts for sale or just talk about it in general.

Avetiso
07-28-2014, 07:57 PM
Well, I've got a ton of parts to donate to the cause.

QC_ZHP
07-28-2014, 08:12 PM
I think its awesome. I've been following closely on their facebook page. It seems to be the most active source I've found to see builds and new spec parts.

Hornung418
07-28-2014, 08:15 PM
Yeah I've been following them too. I just want to see if anyone on here is gonna try to be involved.

Hornung418
08-16-2014, 03:40 PM
Bump. Looks like they just released the spec tune.

http://store.bimmerworld.com/mobile/epic-motorsports-software---spec-e46-p2269.aspx

Sent from my GS3.

az3579
08-16-2014, 06:27 PM
Bump. Looks like they just released the spec tune.

http://store.bimmerworld.com/mobile/epic-motorsports-software---spec-e46-p2269.aspx

Sent from my GS3.

That only mentions MS43... I thought I remember reading somewhere that you said it doesn't HAVE to be MS43. Is this correct?

Hornung418
08-16-2014, 06:28 PM
Click the MS43 and you choose the management option :)

Sent from my GS3.

az3579
08-16-2014, 06:29 PM
Gotcha. Thanks.

Hornung418
08-21-2014, 05:28 PM
Holy cow!

http://richmond.craigslist.org/cto/4628434090.html

Sent from my GS3.

derbo
08-22-2014, 09:10 AM
That Suspension setup. I am very curious on its mannerism. at $2600 idk..lol

Hornung418
08-24-2014, 05:29 PM
That Suspension setup. I am very curious on its mannerism. at $2600 idk..lol

What did your Ground Control run you?

Also keep in mind that the idea is to out drive the others, not have the most money and buy the best stuff.

I am curious to see what feed back the set ups get after a few track sessions.

Sent from my GS3.

derbo
08-24-2014, 07:14 PM
What did your Ground Control run you?

Also keep in mind that the idea is to out drive the others, not have the most money and buy the best stuff.

I am curious to see what feed back the set ups get after a few track sessions.

Sent from my GS3.



My GC ran me about 1800 then some changes in my springs probably nets me around the cost of the $2600 of the MCS SA setup.

Hornung418
08-24-2014, 07:42 PM
Okay. Good to know. These are single adjustable from what I understand. And the spring rates are fixed.

The only thing that would set these cars apart are the weight (as there is only a minimum listed) and the rear differential. 3.46 LSD or 2.93 Open...

Sent from my GS3.

derbo
08-24-2014, 08:13 PM
Okay. Good to know. These are single adjustable from what I understand. And the spring rates are fixed.

The only thing that would set these cars apart are the weight (as there is only a minimum listed) and the rear differential. 3.46 LSD or 2.93 Open...

Sent from my GS3.




Suspension
MCS single adjustable non-remote reservoir shocks with 750/850 springs.
Front camber plates and rear shock mounts w/ spherical bearings.
Polyurethane/Delrin control arm bushings.
Sway bars must be steel, non-bladed, using stock mounting location.

MCS shocks 2649.99
Hyperco springs $299.99
Camber plates/RSM ?????
Sway bars ????


Damn this is one nice suspension setting. I like this setup except those 750/850 springs is heavy as helll .

derbo
09-14-2014, 09:04 PM
Damn I want this exhaust setup, but it's not CA street legal. :(