FS- sedan- vorsteiner v-gtr cf hood, v-csl cf bumper, modbargains csl trunk, ...

[Calichase]

Hello everyone,
Parting out my e46 sedan and am selling the following items

Vorsteiner v-gtr cf hood
-painted titanium silver, vents left cf
-sedan fitment
-very rare and aggressive
-few minor rock chips
-looking to trade for stock facelift plus cash
-asking 1350 obo, if the price doesn't work for you, send me a message and we can talk.

http://img.tapatalk.com/d/14/07/07/sapy9yta.jpg
http://img.tapatalk.com/d/14/07/07/u2epeba5.jpg
http://img.tapatalk.com/d/14/07/07/ydyhyjed.jpg
http://img.tapatalk.com/d/14/07/07/gyjane6e.jpg
http://img.tapatalk.com/d/14/07/07/uqymu3a7.jpg



Vorsteiner m3 v-csl cf bumper
-will only work on a sedan
-will need to trade my carrier and shock absorbers for yours to make it look correct.
-very unique paint scheme with top edge left cf to show the beautiful weave
-I added a symmetric intake hole in the hopes of having dual brake ducts or dual intake if I was was to do a s62 swap.
-don't really know how much to ask for this. So unique and custom, and certainly not for everyone, maybe $750 plus your stock bumper, carrier and shocks. Feel free to send me a message if you are interested and we can talk things through. Don't really know how to put a price on it.


Modbargains csl trunk
-sedan fitment
-mint condition
-lip and license pants recess left cf
-looks very aggressive
-added an optional clear coat layer to protect it
-asking $600 obo, do not need stock trunk.

http://img.tapatalk.com/d/14/07/07/geve4uty.jpg
http://img.tapatalk.com/d/14/07/07/aby7e4a3.jpg


All parts match titanium silver exceptionally well.
Located in md, 21638.

You can verify all of this, by looking at my build thread over at e46 fanatics. Unfortunately I didn't know about this site until recently.
Click -> http://forum.e46fanatics.com/showthread.php?t=974248
Click->
(Yes I know it's a 325i, luckily I finally got an ///M haha)

Lastly

25th anniversary bbs rs2
18x 8.5 et 40
18x10 et 45

Wrapped in brand new hankook ventus v12s
225/35
255/30

they looked phenomenal, a very unique set of wheels, especially on an e46.

Rear drivers side wheel has major(really bad) curb rash, others have very minor.they are 2 piece and I have tracked down a lip/barrel for 350 for the one rear. Could put you in touch.

$1600obo (very negotiable)

http://img.tapatalk.com/d/14/07/07/9yma9e5u.jpg
http://img.tapatalk.com/d/14/07/07/u7ujy9e3.jpg




Feel free to shoot me a message here, or on any other forum, or give me a text or call at 4one 0 7 zero3 four 1 six 2

Help me fund a vf-570 for my new ride!

http://img.tapatalk.com/d/14/07/07/ysemu3y2.jpg
http://img.tapatalk.com/d/14/07/07/rujunada.jpg


Sent from my iPhone using Tapatalk

[danewilson77]

Please list starting prices. Apologize if I missed them.

The friendliest forum on the planet.

[Calichase]

Whoops! Thanks for letting me know


Sent from my iPhone using Tapatalk

[rguti153]

B B S love those wheels

Sent from my SCH-I545 using Tapatalk

[Hornung418]

http://img.tapatalk.com/d/14/07/07/rujunada.jpg

Sick picture! Amazing timing to capture that strike. Set that as my new lock screen.

Sent from my GS3.

[OtterEffect]

That has to be one of, If not the most epic picture I have ever seen. GLWS!


Sent from my iPhone using Tapatalk

[Calichase]

Okay so since I'm getting so little interest, I figure I would ask a few questions here. What would you guys truly pay for this stuff? I'm not trying to screw anyone over. Obviously when I bought this stuff I realized I wouldn't get the money back in full when I sold, but I expected to at least have some interest?


Sent from my iPhone using Tapatalk

[Hornung418]

Okay so since I'm getting so little interest, I figure I would ask a few questions here. What would you guys truly pay for this stuff? I'm not trying to screw anyone over. Obviously when I bought this stuff I realized I wouldn't get the money back in full when I sold, but I expected to at least have some interest?


Sent from my iPhone using Tapatalk

Everything is painted TiAg...that's your biggest issue right now.

Personally, I would like to see more of the BBS RS2s.

Sent from my GS3.

[Calichase]

Everything is painted TiAg...that's your biggest issue right now.

Personally, I would like to see more of the BBS RS2s.

Sent from my GS3.

Great points brought up. Certainly narrows the market down ALOT.


Sent from my iPhone using Tapatalk

[Avetiso]

Don't expect any return on paint. In fact, it's even worse because nobody can even run raw CF, now they HAVE to paint it unless it's TiAg, and even then, you can't be sure it'll match colors.

[Pip]

Normally not too big of an issue, but we don't really have too many members with tiag or at least it seems that way. :dunno

[pilotnick1203]

How do you get the e46 hood from them? Fit ZHP coupes?

[pilotnick1203]

Normally not too big of an issue, but we don't really have too many members with tiag or at least it seems that way. :dunno

I am TiAg :)

[sillieidiot]

Okay so since I'm getting so little interest, I figure I would ask a few questions here. What would you guys truly pay for this stuff? I'm not trying to screw anyone over. Obviously when I bought this stuff I realized I wouldn't get the money back in full when I sold, but I expected to at least have some interest?


Sent from my iPhone using Tapatalk

really, it's because all your prices are way too high. and some of the details for them are incorrect, and you neglected some details. and painted/unpainted doesn't have any affect on price really.

gtr hood: it's not that rare, but it is discontinued. it still only goes for about 1000-1200 depending on condition. and with trade + cash, it should be even cheaper.

vcsl bumper: it's NOT the only vcsl fitted to a non-m. there have been many, both on non-m coupes and sedans. an unmodified vcsl bumper goes for 1200 tops. and that's with the original splitters. you have some aftermarket non vcsl splitter + it's modified with the extra intake hole. proper price should be closer to like 750-800 (less with trade).

csl trunk: you're looking at 400-500 tops.


How do you get the e46 hood from them? Fit ZHP coupes?

it won't fit coupes.

[Taliben]

Those BBS's really aren't that aggressive and you don't need a ton of fender work to get them to fit. Plenty of people run 18x8.5 et35 fronts which isn't that aggressive to begin with and then for the rears 18x10 et45 fits fine. So IMO you might be scaring potential buyers away by advertising them as ultra aggressive and needing a ton of fender work to fit when in reality it's not that hard to get em to work. Just my 2 cents.

[danewilson77]

Define "Major fender work" please.

[rguti153]

Arm n a leg to fix the rims to perfect condition

Sent from my SCH-I545 using Tapatalk

[Hermes]

gtr hood: it's not that rare, but it is discontinued. it still only goes for about 1000-1200 depending on condition. and with trade + cash, it should be even cheaper.

^this

The facelift coupe hood is the rare one, and I've seen those (when they occasionally pop up) for about $1000-1500

Edit: the only reason I don't own one is the only ones I've seen for sale wouldn't ship to me

[sillieidiot]

yeah i know, i'm looking for another one. just in case my shit breaks i have a second lol

[Fenrir]

^this

The facelift coupe hood is the rare one, and I've seen those (when they occasionally pop up) for about $1000-1500

Edit: the only reason I don't own one is the only ones I've seen for sale wouldn't ship to me

Hermes do you mean the OEM facelift coupe hood?

[Hermes]

No, I'm talking about the Vorsteiner facelift coupe hood

http://i127.photobucket.com/albums/p139/LakeShow423/IMG_0779.jpg

[Fenrir]

Ahhhh ok lol.

[Calichase]

Those BBS's really aren't that aggressive and you don't need a ton of fender work to get them to fit. Plenty of people run 18x8.5 et35 fronts which isn't that aggressive to begin with and then for the rears 18x10 et45 fits fine. So IMO you might be scaring potential buyers away by advertising them as ultra aggressive and needing a ton of fender work to fit when in reality it's not that hard to get em to work. Just my 2 cents.

I realized that I had done the fender work to fit a set of dpe's prior to these. Those are what required the fender work, these did not at all. I assumed that since they fit my car somewhat aggressively with fender work, that any other car would need that too. Party because I had 5mm spacers rear and 15mm front, that's what made them sit out with the pulled/rolled fenders. They fit well within the specification like you stated without spacers! Thanks for clarifying!

And thank you to everyone else's comments, I really had very little clue on how to price this stuff, as you can tell. I will adjust accordingly.

And I am curious to see other m3 Vorstiener v-csl bumpers on sedans. I went through h*ll to make it fit, finally cutting a small triangle out on each side and bending the outer sides in to accommodate the small fenders of the sedan.


Sent from my iPhone using Tapatalk

[sillieidiot]

you can check out my friend, patdeezy's car on e46f. he has a vcsl on his sedan and it looks perfect.