View Full Version : Noob Question
cherides147
04-25-2014, 07:54 AM
If i get a 3.64 LSD for my zhp will it go right up or do i have to byu other components aside the differential? thanks
mbeckel
04-25-2014, 07:56 AM
If i get a 3.64 LSD for my zhp will it go right up or do i have to byu other components aside the differential? thanks
Should be a direct replacement
Sent from in the bushes
Hornung418
04-25-2014, 07:56 AM
Is it from a non M?
Sent from my GS3.
ELCID86
04-25-2014, 08:02 AM
Welcome.
Some links:
http://www.zhpmafia.com/forums/showthread.php?4273-Anyone-have-the-M3-LSD-swap
http://www.zhpmafia.com/forums/showthread.php?6626-Rear-End-Swap
http://www.zhpmafia.com/forums/showthread.php?7030-Starting-M3-rear-end-diff-swap-doityourself
http://www.zhpmafia.com/forums/showthread.php?8461-LSD-on-a-zhp
Avetiso
04-25-2014, 09:14 AM
Unless it is an after market unit made for non M, it will not fit.
"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
Hermes
04-25-2014, 09:54 AM
Did you mean 3.62 M3 large case? No it doesn't just bolt in
cherides147
04-25-2014, 02:58 PM
yeah i meant 3.62 from a m, so i know i would need the rear axles would i need subframe and driveshaft?
Tnhl1989
04-25-2014, 07:13 PM
Yep! Derbo is a expert on the matter and I think Wyatt just did the same thing. I will be also doing the LSD swap as well and have a whole rear end and brakes all around to swap into my car as well. So it's not really a easy task however it's possible. To make it a direct swap you would need a aftermarket one.
Hermes
04-25-2014, 09:08 PM
Derek has a M3 rear end, Wyatt has an OS Giken unit.
Send derbo a message
330i ZHP
04-26-2014, 12:58 PM
you will go nuts on the highway if you go to the M3 diff on a 330...the rpm will make you want for a 7th or even 8th gear
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.