View Full Version : Need your guys opinion on this retrofit offer.
danewilson77
02-17-2011, 08:31 AM
PM I received a bit ago....
"Hey, so the price would be (ballpark):
Retrofit a set of Lexus RX330
Projectors: $170 with clear lenses
Shrouds: $40
Wiring harness: $20
Labor: $200
Total: $430
You can supply the bulbs and ballasts, unless you want me to buy them. In which case:
Philips 85122+ (OEM, 4300K) Bulbs: $95
OR
Morimoto 3five (aftermarket, comes in variety of colors: 3000K-6000K) Bulbs: $45
Matsushita Gen4 (OEM Nissan) Ballasts: $150
OR
Morimoto 3five (aftermarket) Ballasts: $110
Cheapest combo of bulbs and ballasts comes to an additional $155. Most expensive would be $245 additional. If you have these parts already, then you're more than welcome to use your existing parts.
Anyways, let me know if you have any questions. If you can find the parts for cheaper, let me know!"
All comments are welcome
danewilson77
02-17-2011, 11:44 AM
Mmmmm.......
kayger12
02-17-2011, 11:56 AM
Not ignoring you, brutha. Just don't know enough about the retrofits to know if it's worth it or not...
Nomar06
02-17-2011, 01:31 PM
Do you have the ballast and bulbs alreay? I thinks its a decent deal but not sure on the RX330. If I remember correctly most people do a lens swap on them to get a sharper cutoff. I guess its all up to what you want out of the projectors.
If you end up having to buy bulbs I would go with the 85122 phillips bulbs. After a certain amount of hours the 85122+ loose a bit of lumens. I replaced the 85122 with the 85122+ and noticed they were a bit more "yellow".
Nomar06
02-17-2011, 01:56 PM
Forgot to ask....the shourds, E46 ones correct? being $40 I can guess that they are replicas.
Have you heard of Customlightz.com? They are in Richmond and they do really nice clean work and have tons of experience.
danewilson77
02-17-2011, 02:30 PM
Forgot to ask....the shourds, E46 ones correct? being $40 I can guess that they are replicas.
Have you heard of Customlightz.com? They are in Richmond and they do really nice clean work and have tons of experience.
Thanks for the ecommendation.
I had planned to use my bulbs and ballasts.
My only expectation is that I can see the road when it is dark out....ok? Please?
kayger12
02-17-2011, 03:24 PM
Well aren't we picky.
spencers
02-19-2011, 12:29 AM
Thanks for the ecommendation.
I had planned to use my bulbs and ballasts.
My only expectation is that I can see the road when it is dark out....ok? Please?
Your bulbs and ballasts will work just fine.
The new projectors will give you amazing light output. Does your car suffer from the zkw bowls issue?
danewilson77
02-19-2011, 09:45 AM
Yes it does my brother.
Sent from my Droid using Tapatalk
tripod06
02-19-2011, 01:23 PM
I have done a couple retrofits with my last car. I did a TSX retro and I loved the output. RX330 will have killer output and width as well. I have a set of 85122+ bulbs literally lying around because my last retro was on my car that I wrecked :( anyways I don't know the amount of hours on them. I couldn't even ballpark but they were great to me. Didn't see any negative signs on them of losing life. I might be able to let them go for a low price just to help a new family member out!
danewilson77
02-19-2011, 05:46 PM
I have done a couple retrofits with my last car. I did a TSX retro and I loved the output. RX330 will have killer output and width as well. I have a set of 85122+ bulbs literally lying around because my last retro was on my car that I wrecked :( anyways I don't know the amount of hours on them. I couldn't even ballpark but they were great to me. Didn't see any negative signs on them of losing life. I might be able to let them go for a low price just to help a new family member out!
Thanks for the offer. I will hit you back if I pull the string.
tripod06
02-19-2011, 10:08 PM
Thanks for the offer. I will hit you back if I pull the string.
Yeah let me know!
johnnye23
02-24-2011, 04:41 AM
I will be trying to install high quality aircraft reflective tape on the bowls and see how much improvement I can gain.If that doesn't satisfy me I will be retrofitting with a better quality lamp assy.
az3579
02-25-2011, 02:24 PM
I will be trying to install high quality aircraft reflective tape on the bowls and see how much improvement I can gain.If that doesn't satisfy me I will be retrofitting with a better quality lamp assy.
Do you think the tape will withstand the temperatures inside the housing?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.