The Spacer Swap Thread

[JupiterBMW]

Ok folks... After hanging out with William and Rando tonight (thanks again guys, always great to see you and get some Mafia time in while I'm out here on the ship), I decided to post this thread. We were talking quite a bit about William's new spacers and how he wants to go smaller by 3mm. I was explaining how I want to get my hands on a set of 10mm spacers for my rears to test fit and see how it'd look. So, I had an idea...

I'd like to start this thread to find out who has extra sets of spacers. I think its crazy to spend $50+ for a set of two spacers, only to find out that you need to go wider/narrower... So, this thread can serve as a place for people to post what they have or what they're looking for. For those that have spare spacers and are willing, I'd like to start a borrowing/swapping deal so that we can test fit to see what we may or may not want before buying. This is not a PERMANENT swap thread, just borrowing/loaning for test fitment only!

Rules as I would see them:

1. The borrower pays shipping cost. No reason these can't fit in USPS Priority Small Flat Rate box right or Priority Padded Envelope right?? Each cost less than $6 to ship.

2. You have 1 week to test fit and then return them back to the owner. This way others can have a chance as well.

3. If owner agrees, you can forward them to the next person in line (the third person will then pay you shipping, and whoever sends them back to owner pays return shipping).

4. The owners/loaners shouldn't inquire any cost as they're doing the rest of us the favor!

Of course, this all has to be based on trust in our Mafia family. I think this can be a great idea, but everyone has to be genuine and honest, which I believe we all are here! So, if you think this is a good idea, please post!

Lastly, if you have spacers to loan out, please post quantity and size!

[JupiterBMW]

That all being said, when I get home to Florida, I'd love to borrow a set of 10mm spacers (2) so I can test fit on my rears. :)

[LivesNearCostco]

I'm thinking of buying some 12mm spacers from BimmerWorld during their 12 days of Christmas sale. If I buy them, you can certainly borrow them and try them, but it will be 12mm not 10mm. (You could also try my existing 5mm spacers but I assume that won't be enough to satisfy!)

[Avetiso]

Not sure if it helps, but here is 15mm on a sedan. I did have to roll to make them fit.

http://i1319.photobucket.com/albums/t662/Avetiso/OB%20ZHP/PICT0729_zps6409f6c4.jpg (http://s1319.photobucket.com/user/Avetiso/media/OB%20ZHP/PICT0729_zps6409f6c4.jpg.html)

[Lanister]

Dario,

I think Jon needs to fit test because of his aftermarket rims.

[JupiterBMW]

Dario,

I think Jon needs to fit test because of his aftermarket rims.

Zactly... My current setup has my rear wheel face 15mm out from stock, and my front wheel face 18.4mm out from stock... So, your 15mm spaced OEM 135s are the same fitment as my current wheels... For some reason it looks different on your car than it does on mine... But I dunno...

LivesNearCostco- I would be interested in trying out your 5mm spacers... Of course, it won't be for another month or so... No rush on my end. :)

[Avetiso]

Dario,

I think Jon needs to fit test because of his aftermarket rims.
:facepalm You are right. My bad.

[danewilson77]

I have 10 mm TMS spacers in my shop (VA). I'll be home the 23rd.

QTY = 2

It's not a toy, it's a Droid > Sent from my S4 > Mason, OH

[johnrando]

Perfect Dane. Joop, good to see you too.

[Pip]

Jon is getting aggressive and I like it.

I don't know how the 10mm is going to fit if your wheels are already spaced 15mm from stock, but I want to see it.

[JupiterBMW]

I still have to lower, but I would like to see how this works out. If/when I get them on, I will post pics for sure. One more month and I'm home...


iPhone 5S. Tapatalk (http://tapatalk.com/m?id=1) Pro. BOOM

[alexandre]

If anyone has 10-15mm to give away, my square 215/45/17 winter setup is in bad need of some stance.

[JupiterBMW]

Alex just a reminder, this is a loaner thread... For freebies, please post in the pay it forward thread... :thumbsup


iPhone 5S. Tapatalk (http://tapatalk.com/m?id=1) Pro. BOOM

[alexandre]

Alex just a reminder, this is a loaner thread... For freebies, please post in the pay it forward thread... :thumbsup


iPhone 5S. Tapatalk (http://tapatalk.com/m?id=1) Pro. BOOM

Oops, read too fast :biggrin

[328ioc]

Perfect thread Jon.

I have been trying to figure out what size to go with.

Can I request that those who have spacers add pics much like Aviesto did above?

Hopefully this can help stance noobs like me narrow down an option before I start borrowing sets to test.

Sent from my SCH-I545 using Tapatalk

[ryankokesh]

How do the lugs work? Ship with spacers?

I have a set of fives I can loan out at the moment. They'll be going on eventually though.


Sent from my iPhone

[JupiterBMW]

How do the lugs work? Ship with spacers?

I have a set of fives I can loan out at the moment. They'll be going on eventually though.


Sent from my iPhone

Well for test fit, I'm sure it'd be fine to loan without lugs... Unless of course someone is borrowing some huge spacers, then of course it'd be necessary.

And Devlin, search for pics you lazy sack!!


iPhone 5S. Tapatalk (http://tapatalk.com/m?id=1) Pro. BOOM

[328ioc]

Devlin, search for pics you lazy sack!!

iPhone 5S. Tapatalk (http://tapatalk.com/m?id=1) Pro. BOOM

I have been but they are scattered all over the place there is no one spot with all the various fitments. Lol

Sent from my SCH-I545 using Tapatalk

[JupiterBMW]

yes true, but keep in mind different size tires, wheel offsets, etc will look different.


iPhone 5S. Tapatalk (http://tapatalk.com/m?id=1) Pro. BOOM

[ELCID86]

I'd like to try 15 or 12 on the rear. Maybe 5s or 10 on the front.

[328ioc]

I'd like to try 15 or 12 on the rear. Maybe 5s or 10 on the front.

From all the pictures I HAVE seen (talking to you Joopy) lol.

I think I am going to look into the same set up Shawn.

Sent from my SCH-I545 using Tapatalk

[ELCID86]

So who has loaner 12, 15 or 18?

[JupiterBMW]

I have 10 mm TMS spacers in my shop (VA). I'll be home the 23rd.

QTY = 2

It's not a toy, it's a Droid > Sent from my S4 > Mason, OH

Dane do you still have these? I'd love to test fit. Appreciate it brother...


iPhone 5S. Tapatalk Pro. BOOM

[danewilson77]

Dane do you still have these? I'd love to test fit. Appreciate it brother...


iPhone 5S. Tapatalk Pro. BOOM

Yeah....in transit on its way to OH.

[JupiterBMW]

Yeah....in transit on its way to OH.

Roger that buddy. Would love to borrow them when you get em.


iPhone 5S. Tapatalk Pro. BOOM

[danewilson77]

Affirm

[JupiterBMW]

Would like to bump this thread... I have acquired a set of TMS 10mm spacers, but there's no way I'm getting them on my car... Looking to see if anyone has any 8mm spacers that they'd be willing to send down to Florida for a test fit... I will of course return them, just looking to test fit before buying myself a new set.

Lemme know! Thanks in advance!

[PirateZHP]

Would like to bump this thread... I have acquired a set of TMS 10mm spacers, but there's no way I'm getting them on my car... Looking to see if anyone has any 8mm spacers that they'd be willing to send down to Florida for a test fit... I will of course return them, just looking to test fit before buying myself a new set.

Lemme know! Thanks in advance!

Joop, I've got some 5mm spacers (I'm fairly sure) if you're interested. I can send them with your bimmian phone mount. Let me know.

[JupiterBMW]

Joop, I've got some 5mm spacers (I'm fairly sure) if you're interested. I can send them with your bimmian phone mount. Let me know.

That would be awesome!! I'm thinking I'll need to go down to 5s anyway, just want to stay as wide as possible. Thanks homie!


iPhone 5S. Tapatalk Pro. BOOM

[PirateZHP]

That would be awesome!! I'm thinking I'll need to go down to 5s anyway, just want to stay as wide as possible. Thanks homie!


iPhone 5S. Tapatalk Pro. BOOM

Consider them sent...

[JupiterBMW]

Consider them sent...

Received the spacers today, thanks Matt! Although, they're 3mm, but that's ok, gives me another set to test fit...


To others; still looking to borrow a set of 5s or 8s if you've got them!


iPhone 5S. Tapatalk Pro. BOOM

[PirateZHP]

Received the spacers today, thanks Matt! Although, they're 3mm, but that's ok, gives me another set to test fit...


To others; still looking to borrow a set of 5s or 8s if you've got them!


iPhone 5S. Tapatalk Pro. BOOM

... hmm... they came in a 5mm box. So confused now.

[ELCID86]

^ Are these things like 2x4s that actually are not?

[JupiterBMW]

... hmm... they came in a 5mm box. So confused now.

The part number printed on them ended in "3MM", so I assumed they were 3 mm. I will measure them when I get home and let you know. Although, they did look fairly thin for 5 mm.


iPhone 5S. Tapatalk Pro. BOOM

[PirateZHP]

^ Are these things like 2x4s that actually are not?

If my understanding is correct (and it may not be), 5mm spacers are actually 2.5mm on each side, making the whole spacing 5mm. If I am wrong, someone please correct me and don't kill me. :ducking

[ELCID86]

Matt, mighta gotten ripped off...

[JupiterBMW]

I don't believe so. The 10mm ones I got from Dane are definitely 10mm each. Like I said, I'll measure when I get home and let you know.


iPhone 5S. Tapatalk Pro. BOOM

[PirateZHP]

Matt, mighta gotten ripped off...

They came as a package deal when I bought other stuff, so I am not too worried. They are the family's now... :thumbup

[Crickett]

Wow, completely missed this thread! I have a pair of TMS 10s and 12.5s I’d be willing to let someone try out.

On the other end, does anyone have 15s I could try?


iPhone 5. Tapatalk 2. Aww yeeeah.

[JupiterBMW]

Well folks, I popped the set of 3s on today, and they don't rub!! So, looking to step up to 5s or maybe even 8s. Also, I've got my set of 10s (TMS with extended bolts) to loan out if anyone needs... Likewise, assuming Matt is ok with it, I can loan out the set of 3s he has loaned to me...

Anyway, really looking to get my hands on a set of 8s! I hope that size is the right fit for me!

[PirateZHP]

Well folks, I popped the set of 3s on today, and they don't rub!! So, looking to step up to 5s or maybe even 8s. Also, I've got my set of 10s (TMS with extended bolts) to loan out if anyone needs... Likewise, assuming Matt is ok with it, I can loan out the set of 3s he has loaned to me...

Anyway, really looking to get my hands on a set of 8s! I hope that size is the right fit for me!

We'll just consider the 3s the family's 3mm spacers. :-)

Sent from my SCH-I535 using Tapatalk

[JupiterBMW]

That works! I think I'm going to double them up on one side though to see if 6mm will fit... If so, then I'll search for a set of 7.5s or 8s...

[PirateZHP]

That works! I think I'm going to double them up on one side though to see if 6mm will fit... If so, then I'll search for a set of 7.5s or 8s...

Sweet. Post a pic!

[derbo]

I might need to get those 3mm soon. I'll keep you guys posted. :)

[JupiterBMW]

Yeah, I'll post pics of the doubled up 3s sometime tomorrow... If it still works without issue, I might just pick up a set of 7.5mm spacers and hope they fit.

[danewilson77]

Yeah, I'll post pics of the doubled up 3s sometime tomorrow... If it still works without issue, I might just pick up a set of 7.5mm spacers and hope they fit.

You really need to install spacers and drive a bit to see where the suspension will settle before calling a rub or not.

Sent from my SCH-I545 using Tapatalk

[JupiterBMW]

You really need to install spacers and drive a bit to see where the suspension will settle before calling a rub or not.

Sent from my SCH-I545 using Tapatalk

Yeah I agree... But, no suspension was changed in the back, so no need to wait for anything to settle. The 10s rubbed like hell with only me in the car... The 3s fit just fine (had them on all day, no rubbing)... Looking to go wider, so I'll keep stepping it up until I find a rub, and then go back down one step. :)

[JupiterBMW]

Ok, both 3mm spacers on the drivers side, will test drive in a little bit and see how it goes. The look is a little more appealing though. We're getting there.


iPhone 5S. Tapatalk Pro. BOOM

[328ioc]

Ok, both 3mm spacers on the drivers side, will test drive in a little bit and see how it goes. The look is a little more appealing though. We're getting there.


iPhone 5S. Tapatalk Pro. BOOM

Is it safe to drive with the spacers doubled up?

Sent from my SCH-I545 using Tapatalk

[JupiterBMW]

Its no different than having a 6mm spacer on there. The important part is still having some exposed hub for the rim to center up/ride on... I measure hub depth at 13mm, so this still leaves me 7mm to play with. I'm fairly confident in that. I also swapped to the extended lug bolts at this width...

[TigerTater]

What's the largest spacer that can be used using stock 135's without rolling the fenders, and does anyone have pics.?:)

[JupiterBMW]

Up front you can do 18mm and out back you can do 15mm, 20mm if you want to roll and whatnot.


iPhone 5S. Tapatalk Pro. BOOM

[LivesNearCostco]

I've been missing from this thread since my 12mm spacers from BimmerWorld are still back-ordered.

[derbo]

Has anyone tried running 3mm or 5mm spacers in the front?

[PirateZHP]

Has anyone tried running 3mm or 5mm spacers in the front?

I had the 3mm up front. Obviously, there wasn't much difference. But if you just need a little clearance, it may be useful...

[JupiterBMW]

Hey folks... I finally took some pics of the 3mm spacers doubled up on one side. I can still barely tell the difference... I really want to try the 10s again. I have a feeling things weren't seated right the first time...

Pics... Just so you know, the spacers (6mm) are on the driver's side rear wheel. The front have no spacers, the passenger rear also has no spacer...

http://i88.photobucket.com/albums/k166/jdinisio/2003%20330i%20ZHP%20Pics/IMG_2631.jpg (http://s88.photobucket.com/user/jdinisio/media/2003%20330i%20ZHP%20Pics/IMG_2631.jpg.html)

http://i88.photobucket.com/albums/k166/jdinisio/2003%20330i%20ZHP%20Pics/IMG_2632.jpg (http://s88.photobucket.com/user/jdinisio/media/2003%20330i%20ZHP%20Pics/IMG_2632.jpg.html)

http://i88.photobucket.com/albums/k166/jdinisio/2003%20330i%20ZHP%20Pics/IMG_2629.jpg (http://s88.photobucket.com/user/jdinisio/media/2003%20330i%20ZHP%20Pics/IMG_2629.jpg.html)

http://i88.photobucket.com/albums/k166/jdinisio/2003%20330i%20ZHP%20Pics/IMG_2630.jpg (http://s88.photobucket.com/user/jdinisio/media/2003%20330i%20ZHP%20Pics/IMG_2630.jpg.html)

[ELCID86]

Wow. Not a noticeable difference at all.


Thumbs, iPhone, Tapatalk.

[derbo]

I had the 3mm up front. Obviously, there wasn't much difference. But if you just need a little clearance, it may be useful...

I am wondering about vibration issues. I had issues with vibration with a 5mm up front because the ZHP wheel seemed to be not have enough lip.

[JupiterBMW]

I am wondering about vibration issues. I had issues with vibration with a 5mm up front because the ZHP wheel seemed to be not have enough lip.

Yeah, I spoke quite a bit with one of the guys at TMS and he mentioned vibration being an issue if there isn't enough lip. Basically, the weight is now supported by the lug studs, vs the wheel hub...

TMS sells hub extenders for the front, no real need for me though... As you can see, my front wheels are PLENTY wide as it is... No need to go any further...

[derbo]

The problem is that I need 3mm for clearance. Hub extender seems to be a problem if I constantly need to remove it when I switch rims.

My ARC8 needs a 3mm spacer for clearance issues.
ZHP rims need about 5mm but am running a 12.5mm for the lip since a 5mm has issues even with a hub extension.

I do not want to push out the ARC8 anymore than I have to. If I do a 10 or 12, that is alot of spacing out the front that I dont need. This means the rear will look even more weird LOL. I think the true fix is get 17x9 +42 rims but...uhm yea..thats a big expensive fix.. :X

[JupiterBMW]

I was planning to pull the 3mm this weekend... want me to send them your way?

[derbo]

I'm not ready for them just yet. Thanks Joop! I will post in here when I am and see who has it.

[derbo]

I actually really like the look of the 12.5mm on the front with my ARC8 wheels.

Joop,

is your 10mm with a hubcentric lip on it? or is it the one without the lip?

[derbo]

So who has what right now? I'm looking for another 12.5mm and a 10mm to try out. I don't need the bolts. :)

[ELCID86]

So who has what right now? I'm looking for another 12.5mm and a 10mm to try out. I don't need the bolts. :)

I have either 10 or 12.5 I've never installed. I think 10. Your wcome to borrow em.


Thumbs, iPhone, Tapatalk.

[derbo]

I have either 10 or 12.5 I've never installed. I think 10. Your wcome to borrow em.


Thumbs, iPhone, Tapatalk.


Thanks Shawn! PM sent. :)

[JupiterBMW]

Derek... I have completely forgotten to tell my wife to send you the spacers... Will do it tomorrow.

[derbo]

Derek... I have completely forgotten to tell my wife to send you the spacers... Will do it tomorrow.

It's okay buddy. Take your time! Just let me know when they are shipped out. I am gone for the weekend anyways.

[JupiterBMW]

:thumbsup

[Tnhl1989]

I'll probably need to burrow a set of spacers once I get the rear end out to fit everything together with the current wheels. I know that I literally have like 2mm in the rear between the rims and the calipers on the 330 rear end.

[JupiterBMW]

I'll probably need to burrow a set of spacers once I get the rear end out to fit everything together with the current wheels. I know that I literally have like 2mm in the rear between the rims and the calipers on the 330 rear end.

Wow, what's the wheel spec? Or do you have new rear calipers perhaps... I know how your Northeast guys are getting about brakes of the E82 variety... :shifty


iPhone 5S. Tapatalk Pro. BOOM

[Tnhl1989]

Just the standard m3 brakes. Not the Zcp one yet.

[JupiterBMW]

Just the standard m3 brakes. Not the Zcp one yet.

And where's the thread on this???


iPhone 5S. Tapatalk Pro. BOOM

[derbo]

And where's the thread on this???


iPhone 5S. Tapatalk Pro. BOOM


In his project thread Joop! :)

[derbo]

Derek... I have completely forgotten to tell my wife to send you the spacers... Will do it tomorrow.

Joop,

I just received the Spacers. I will work on the car tonight.

[LivesNearCostco]

The 12mm spacers I ordered from BimmerWorld last Christmas have been backordered a while but finally shipped last week and are supposed to arrive tomorrow.

[BimmerWill]

So any spacers on the front start running into vibration issues?

sent from S4

[johnrando]

Why do you say that? I've run front spacers with no issues.

Sent from my DROID4 using Tapatalk 2

[ELCID86]

The 12mm spacers I ordered from BimmerWorld last Christmas have been backordered a while but finally shipped last week and are supposed to arrive tomorrow.
Wow, that's quite a back order.

[LivesNearCostco]

Yup--everything else from the order shipped back in December. The spacers arrived yesterday and they look nice, but I haven't had time to try them on the car. I asked BW about them them while waiting and they said something about switching to a new design or something.

[derbo]

Why do you say that? I've run front spacers with no issues.

Sent from my DROID4 using Tapatalk 2


I think the concern is under 10mm spacers on the front.

[ELCID86]

Yup--everything else from the order shipped back in December. The spacers arrived yesterday and they look nice, but I haven't had time to try them on the car. I asked BW about them them while waiting and they said something about switching to a new design or something.
Hope you like them. I still need to install the one's I bought from Dario for Colin's car.

[derbo]

Yup--everything else from the order shipped back in December. The spacers arrived yesterday and they look nice, but I haven't had time to try them on the car. I asked BW about them them while waiting and they said something about switching to a new design or something.

Did you get these?

http://store.bimmerworld.com/bimmerworld-wheel-spacers-p2246.aspx

[BimmerWill]

I think the concern is under 10mm spacers on the front.

Is this due to lack of concentric ring on the spacers or simply to do with the thickness?

sent from S4

[johnrando]

Yes, Turner has an article about spacers under 10mm for the front, they recommend hub extenders for that depending on the size, etc.

Sent from my DROID4 using Tapatalk 2

[danewilson77]

.


As long as we are not just 'rehashing the bashing', this could and should be a useful thread.

[derbo]

Yes, Turner has an article about spacers under 10mm for the front, they recommend hub extenders for that depending on the size, etc.

Sent from my DROID4 using Tapatalk 2

http://www.turnermotorsport.com/t-wheel-spacers-encyclopedia.aspx

[LivesNearCostco]

Yup, but I think the ones I originally ordered and paid for back in December were the BWsport silver spacers with smaller, round cutouts. They still sell it in the 20mm size (see picture below). These new ones are black with bigger cutouts, larger gap around edge (to allow prying off if stuck) and a more skeletal look, presumably weigh less. I think BW changed suppliers, or designed and had these made recently to replace the ones they were selling before.

Here's what the old ones looked like in 20mm and new ones in 12mm
1396313964


Did you get these?
http://store.bimmerworld.com/bimmerworld-wheel-spacers-p2246.aspx

[SoDelBMW]

Just saw this thread and am quite confused on the point of spacers? I'm getting that they are used so there's enough space in the wheel well it get underneath or so they stick out? I just need a lesson on everything wheel and tire based, after getting into looking at all of the setups it gets me so disoriented.

Sorry I'm a stupid newbie, your all probably laughing at this response

[Newjack]

Just saw this thread and am quite confused on the point of spacers? I'm getting that they are used so there's enough space in the wheel well it get underneath or so they stick out? I just need a lesson on everything wheel and tire based, after getting into looking at all of the setups it gets me so disoriented.

Sorry I'm a stupid newbie, your all probably laughing at this response

Spacers are generally used to make the ass look fat.

Sent from my Nexus 4 using Tapatalk

[derbo]

Just saw this thread and am quite confused on the point of spacers? I'm getting that they are used so there's enough space in the wheel well it get underneath or so they stick out? I just need a lesson on everything wheel and tire based, after getting into looking at all of the setups it gets me so disoriented.

Sorry I'm a stupid newbie, your all probably laughing at this response

Not laughing at all! You have to learn somewhere.

I believe the reason our wheels are sunken in is because German Manufacturer Rules/Laws require some space between the fender and wheels to allow for snow chains to be installed easily.

There are many reasons for spacers.

Main ones I can think of:

Clear suspension or brake components that are too close to the existing wheel
eliminate the gap mentioned above and allow for a flushed look.
Convert to a different lug pattern.

[SoDelBMW]

Not laughing at all! You have to learn somewhere.

I believe the reason our wheels are sunken in is because German Manufacturer Rules/Laws require some space between the fender and wheels to allow for snow chains to be installed easily.

There are many reasons for spacers.

Main ones I can think of:

Clear suspension or brake components that are too close to the existing wheel
eliminate the gap mentioned above and allow for a flushed look.
Convert to a different lug pattern.


Alright so I was on the right track but in the next month or 2 I will be getting all new tires and wheels and want to upgrade to 18x8.5 style 313 from the 17x8 style 68. Will this work with staggered approach on tires. Now I think I have 225/40 front and 245/35 on the back

[Crickett]

Alright so I was on the right track but in the next month or 2 I will be getting all new tires and wheels and want to upgrade to 18x8.5 style 313 from the 17x8 style 68. Will this work with staggered approach on tires. Now I think I have 225/40 front and 245/35 on the back

Welcome to the fun world of wheel/tire sizing! I cannot recommend these two sites enough: BMW-Treff Felgenkatalog (http://felgenkatalog.auto-treff.com/) for OE BMW wheel specs, and Will They Fit (http://felgenkatalog.auto-treff.com/) for wheel/tire/offset sizing calculations and visualization.

[Pip]

The tires will work, but you'll have to accept that the 225 will be stretched on the 8.5" rim until you wear thought it. Fitment can be figured out using what Crickett mentioned above. It should be fine because it is sunken in 2mm from the stock zhp wheels which fit just fine. If anything you could space them out a little for a more flush look.

[johnrando]

For most uses, spacers = looks, pushing the tires out a little. Everything else said below is true but it's a lot about looks. People also say a wider stance with the spacers/tires = better handling, which could be minimally true. But others counteract saying it could introduce other potential issues due to adding another component. It's what you choose to believe and what your use is. No doubt there are things like a BBK that you can't use stock tires with unless you have spacers. In the end, there are positives and negatives, and mostly good things depending on what you want to do.

[derbo]

Update:

I current have 8.5 +40 Rims.

Currently I am using a 12.5mm spacer in the front because I need to clear my brakes. I think the actual minimum to clear the brakes is actually 5mm. Since I have the front sticking out right now I tried Joop's 10mm Spacers in the rear.


Effective Offset:

Front: 8.5 +27.5
Rear: 8.5 +30

This is how it looks.

http://i.imgur.com/A96sVBsl.jpg http://i.imgur.com/AqDKI6Pl.jpg


The rear fenders are rolled and I rub inside the fender not the actual fender lip.


Anyone have a 5mm or 7mm spacer to send my way to try out?

[JupiterBMW]

Update:

I current have 8.5 +40 Rims.

Currently I am using a 12.5mm spacer in the front because I need to clear my brakes. I think the actual minimum to clear the brakes is actually 5mm. Since I have the front sticking out right now I tried Joop's 10mm Spacers in the rear.

Anyone have a 5mm or 7mm spacer to send my way to try out?

Nicely done Derek. I actually received a PM from Avetiso that Vas wanted to try out the 10mm spacers, so if you are done with them, feel free to send them to Vas. As long as they make it back to me by the later part of June, I'm happy. :)

I too am still looking to test fit some 7.5mm spacers! Anyone?!?!

[derbo]

Thanks again Joop! So I'll PM vas and get his address and send it his way on Monday.


Sent from my iPad

[JupiterBMW]

Sounds good to me.


iPhone 5S. Tapatalk Pro. BOOM

[WOLFN8TR]

I need to borrow some 12mm spacers and bolts if anyone has a pair. Thanks...

[ELCID86]

I need to borrow some 12mm spacers and bolts if anyone has a pair. Thanks...

I may. I have 15, 12, and 10mm I'm going to experiment with--hopefully at Bruce's BBQ day next weekend. After I see what looks best on my son's car, I'll know what I have available.

[WOLFN8TR]

Sweet Thanks! I just installed some KW V1's and my front tires are rubbing on the coilovers even with 10mm spacers. After talking with Dane I think the problem is my 18x8.5 squared setup.

[LivesNearCostco]

You can borrow mine. Let me know how to ship and when you need them.

I need to borrow some 12mm spacers and bolts if anyone has a pair. Thanks...

[derbo]

You can borrow mine. Let me know how to ship and when you need them.


Jon, I used USPS to ship out Joop's spacers.

https://store.usps.com/store/browse/uspsProductDetailMultiSkuDropDown.jsp?productId=P_ EP14PE&categoryId=priority-mail

USPS supplies are free when you order them online. Flat Rate $6 to ship.

The supplies are free when you order from USPS.

[ELCID86]

Jon, I used USPS to ship out Joop's spacers.

https://store.usps.com/store/browse/uspsProductDetailMultiSkuDropDown.jsp?productId=P_ EP14PE&categoryId=priority-mail

USPS supplies are free when you order them online. Flat Rate $6 to ship.

The supplies are free when you order from USPS.

What did you put them in, the flat rate envelope? I don't think they fit in the small box (do they?) and the medium box is $12.35.

[derbo]

What did you put them in, the flat rate envelope? I don't think they fit in the small box (do they?) and the medium box is $12.35.

I put the spacers in the flat rate padded envelope.. Of course I didn't put the bolts in there but it would've fit with all the room. Dario has the spacers but no bolts..lol :facepalm

[LivesNearCostco]

Thanks, Derek. Just ordered some flat rate boxes and envelopes.

[WOLFN8TR]

You can borrow mine. Let me know how to ship and when you need them.

Sweet! I will send you a PM. :headbang

[johnrando]

Anyone have 1 set of 5mm's (and lugs)?

[LivesNearCostco]

Found yesterday my BimerWorld 12mm spacers do not fit in the small flat rate box--just a little too big in diameter. I forgot to order some padded flat rate envelopes, will do that now. My extended lug bolts are only for 3mm or 5mm spacers but I now have my old 75mm studs to loan too. Waiting for Gary to see if he needs them!

Edit, found the padded flat rate envelopes at USPS.com, ordered pack of 5. But it says takes up to 7 days to get them. A good deal... only $5.95 for the padded flat rate envelope vs. $5.60 for unpadded flat rate envelope vs. $12.35 for medium flat rate box.

[derbo]

Found yesterday my BimerWorld 12mm spacers do not fit in the small flat rate box--just a little too big in diameter. I forgot to order some padded flat rate envelopes, will do that now. My extended lug bolts are only for 3mm or 5mm spacers but I now have my old 75mm studs to loan too. Waiting for Gary to see if he needs them!

Edit, found the padded flat rate envelopes at USPS.com, ordered pack of 5. But it says takes up to 7 days to get them. A good deal... only $5.95 for the padded flat rate envelope vs. $5.60 for unpadded flat rate envelope vs. $12.35 for medium flat rate box.

I found the padded envelopes to be a good deal! The lady at USPS looked at me funny when I went to ship it cause it was just two metal spacers. LOL.


Sent from my iPad

[ELCID86]

One trick is to put the smaller box into the larger (cheaper) envelope if it doesn't close correctly.


Thumbs, iPhone, Tapatalk.

[Avetiso]

I have Jon's 10mm spacers. If anyone needs them, shoot me a PM and shipping costs and I'll send them over to you. Jon won't be home until July so this way we can keep them circulating.

Sent from my SM-G900T using Tapatalk

[JupiterBMW]

I have Jon's 10mm spacers. If anyone needs them, shoot me a PM and shipping costs and I'll send them over to you. Jon won't be home until July so this way we can keep them circulating.

Sent from my SM-G900T using Tapatalk

I approve this message. Just so long as they get back to me when I get home, and in as good of condition as when I sent them out. :thumbsup :)

[derbo]

Remember Joop's 10mm spacer has no bolts with it.. :rofl


Anyone have a 5mm or a 7mm to shoot towards me?

[johnrando]

I'll take either after you get them Derek.

[derbo]

I'll take either after you get them Derek.


The 5 or 7? I don't think we have anyone who has these available for borrowing.

[johnrando]

Either. I have to try different ones to see what fits with my suspension. I know 10s hit the underside of the wheel wells. Want to try different sizes. Measuring won't quite do it.

[SoDelBMW]

Does anyone have 7.5mm spacers? Do you think these will fit our cars?
http://www.turnermotorsport.com/p-89-turner-motorsport-75mm-hubcentric-front-wheel-spacer-kit.aspx

[derbo]

Those will fit our cars. I rather test a set out first before buying. Hopefully someone has a 7mm.


Sent from my iPad

[JupiterBMW]

I've been asking for some 7.5s since I started this thread!! I'm first in line!! :biggrin

If nobody has a set to loan by the time I get home, I'll buy the ones from TMS and we'll go from there...


iPhone 5S. Tapatalk Pro. BOOM

[SoDelBMW]

I've been asking for some 7.5s since I started this thread!! I'm first in line!! :biggrin

If nobody has a set to loan by the time I get home, I'll buy the ones from TMS and we'll go from there...


iPhone 5S. Tapatalk Pro. BOOM

I'm already one step ahead of you, I'm about to order them today.:)

[JupiterBMW]

So does that mean you're going to send them all over the country for others to try?? :biggrin

[SoDelBMW]

So does that mean you're going to send them all over the country for others to try?? :biggrin

That depends on how they fit on my car, if they fit well they are on there for life, if not then I would probably sell them to you or who ever wants them

[JupiterBMW]

This is the swap for fitment thread. I'll buy my own set if/when the time comes! But definitely let us know what you think.

[QC_ZHP]

Even though its the swap for fitment thread. If anyone is interested in swapping their 12.5's for my 15's, I'm game.

[derbo]

This is the swap for fitment thread. I'll buy my own set if/when the time comes! But definitely let us know what you think.

Let me borrow them if that time comes ;)

[derbo]

Does anyone have a 3mm spacer I can try?

14267

I have a 2 business card thick clearance in the front.

sent from Moto X Dev Edition

[Avetiso]

Does anyone have a 3mm spacer I can try?

14267

I have a 2 business card thick clearance in the front.

sent from Moto X Dev Edition

Dude, you're on studs. Try washers.

Sent from my SM-G900T using Tapatalk

[JupiterBMW]

Derek I have a set of 3mm spacers. I can send them when I get home or very nicely ask my wife to package and send for me if you need them now


iPhone 5S. Tapatalk Pro. BOOM

[BimmerWill]

Would anyone be willing to let me borrow any spare spacers they have laying around? A buddy of mine is going to machine some for me and it would help if I had a real good template to make a solid blueprint for him.

Would really appreciate it. I'd pay shipping both ways through paypal of course.

sent from S4

[johnrando]

Derek, I'll take the 3mm's after you if that's OK Joop.

[derbo]

Dude, you're on studs. Try washers.

Sent from my SM-G900T using Tapatalk

The whole point is to make sure the spacer will not introduce vibration by too small of a lip. The load introduced to the studs is probably not a good idea either. I would use spacers to test what size I need, but beyond that, I wouldn't drive on them.



Derek I have a set of 3mm spacers. I can send them when I get home or very nicely ask my wife to package and send for me if you need them now


iPhone 5S. Tapatalk Pro. BOOM

Joop, Just let me know when you return. I hate to ask your wife to send another set again. LOL.

[danewilson77]

Washers are only used for fitment. Not for driving. I don't think he was suggesting that.

The friendliest forum on the planet.

[derbo]

Washers are only used for fitment. Not for driving. I don't think he was suggesting that.

The friendliest forum on the planet.

I hope not. I wanted to test 3mm spacers on the road, as vibration is a concern. :)

[UdubBadger]

would love to swap my 10's with some 15's or 20's. Looking for turners specifically with the extended bolts too.

:)

[danewilson77]

Ugh. Vibration.

The friendliest forum on the planet.

[QC_ZHP]

would love to swap my 10's with some 15's or 20's. Looking for turners specifically with the extended bolts too.

:)

I have Turner 15's and bolts. Really wanted some 12.5's but I'm down if you're interested.

[UdubBadger]

Let me go check really quick and make sure mine are 10's and not actually 12.5's

Black or silver bolts?


Goin' HAM mobile

[QC_ZHP]

black

[derbo]

I believe I have black bolts + 12.5mm I could swap with someone with a 10mm. Tri-fecta swap? 10mm works fine on the front without and hub issues?

[QC_ZHP]

Im all for it. I've been running 10mm up front for almost 10k+ issue free.

[UdubBadger]

Black is perfect


Goin' HAM mobile

[UdubBadger]

Just realized my car is at the shop though lol. I'll check tonight


Goin' HAM mobile

[derbo]

You guys swap first, then I can swap with you Steve, as I need spacers to keep my car on the ground :X

[UdubBadger]

Just an FYI id need them first to be able to pull mine off. Running et22 255 width tires in front so if I run naked rears it'll be like driving a t-rex


Goin' HAM mobile

[ryankokesh]

Just an FYI id need them first to be able to pull mine off. Running et22 255 width tires in front so if I run naked rears it'll be like driving a t-rex


Goin' HAM mobile

:rofl

Do it for shits and giggles?


Sent from my iPhone

[UdubBadger]

Ok yep 10mm confirmed.


Goin' HAM mobile

[derbo]

We all have TMS spacers right?

I have 12.5mm spacers with black bolts. Going to swap the 10mm with Steve who will swap the 10mm with Seth? LOL.

[UdubBadger]

Yes I have 10mm Turner with black bolts. Should we just ship directly to each other (the right person)?


Goin' HAM mobile

[ryankokesh]

I'm confused.


Sent from my iPhone

[QC_ZHP]

My head hurts. Haha.

As long as I won't cause any damage running 10mm up front and no spacer in the rear, I don't mind being the first to give up the spacers. I'll take one for the team for the sake of saving some $$ all around. Mine are TMS btw.

[UdubBadger]

Oy vey ok...

Badger has 10mm needs 15mm
Derbo has 12.5mm needs 10mm
QC has 15mm needs 12.5mm

So QC ships his 15s to badger, badger will ship his 10s to Derbo and Derbo will ship his 12.5s to QC.

Got it?


Goin' HAM mobile

[QC_ZHP]

So both you guys need spacers in return before shipping yours out?

[derbo]

So both you guys need spacers in return before shipping yours out?

Steve ship to Seth his 15mm spacer.
Seth ships his 10mm spacer to Derek.
Derek ships his 12.5mm to Steve. LOL

ROUND ROBIN!

Sounds like a math problem in high school. Let me head home tonight and confirm I can find my bolts for the 12.5mm spacers. I haven't use the bolts ever since I went wheelstuds so I am not sure if they are still in my storage area. I will confirm tonight!

[UdubBadger]

I'm out - just measured and need 20mm. Ordered a new set. I'll sell my 10mm and bolts for $60


Goin' HAM mobile

[Avetiso]

"Debro" :rofl from now on, Derek will be known as "de-bro" aka the bro.

Sent from my SM-G900T using Tapatalk

[QC_ZHP]

Looking to sell Derek? Don't need bolts, going studs.


"Debro" :rofl from now on, Derek will be known as "de-bro" aka the bro.

Sent from my SM-G900T using Tapatalk

Glad someone else noticed that :rofl He's not just a bro, he's DE BRO

[derbo]

-______________________- at the de bro comment LOL

[UdubBadger]

I kept getting autocorrected from Derbo to Debro lol


Goin' HAM mobile

[ELCID86]

If it hasn't already been said, these little wheel hanger devises are well worth it when doing any wheel removal work. I think I got mine from ebay for ~$10.

http://www.amazon.com/Torque-Solution-Wheel-Guide-Tool/dp/B0071366OS/ref=sr_1_2?ie=UTF8&qid=1402931953&sr=8-2&keywords=bmw+wheel+lug+tool

I also have a set of 15mm spacers available.

[fredo]

I had an OEM wheel hanger on my e46. It even fits on the trunk tool kit . The OEM part number is:

71-11-1-093-774

[ELCID86]

I had an OEM wheel hanger on my e46. It even fits on the trunk tool kit . The OEM part number is:

71-11-1-093-774
True. I like the shorter one better.

[johnrando]

I have an ECS one. It helps.

[derbo]

studs are even easier ;)

[derbo]

Looking to sell Derek? Don't need bolts, going studs.



Glad someone else noticed that :rofl He's not just a bro, he's DE BRO


Sorry Steve, I skipped this post somehow. If you want, you can buy Seth's 10mm and tell him ship it to me, and I can ship you my 12.5mm. :) I'll ship you the bolts regardless since you might need them to sell later on.

[BimmerWill]

Anyone interested in selling either there 10 mm or 12.5mm spacers and bolts to me? :)

sent from S4

[UdubBadger]

Yes


Goin' HAM mobile

[QC_ZHP]

Sorry Steve, I skipped this post somehow. If you want, you can buy Seth's 10mm and tell him ship it to me, and I can ship you my 12.5mm. :) I'll ship you the bolts regardless since you might need them to sell later on.

Are your fenders rolled?

[BimmerWill]

Yes


Goin' HAM mobile
pm sent

sent from S4

[derbo]

Are your fenders rolled?

Rear's are rolled. I don't remember if I did the fronts or not. I don't think I do.

[QC_ZHP]

Ok, I'm aiming to get mine done by the weekend. Any reason I should rub with a roll and ET 38.5? (51mm-12.5mm).

[derbo]

Ok, I'm aiming to get mine done by the weekend. Any reason I should rub with a roll and ET 38.5? (51mm-12.5mm).

This is on the factory ZHP 8.5 rear? I rubbed a little with 8.5 +40 255/35/18 but I was lowered with no fender gap at all. I say you don't need to roll much, maybe just fold the inner lip so it doesn't flare out too much.

[QC_ZHP]

Yeah, stock wheel.

I'll be in touch about the spacers after I get the fenders worked on.

[JupiterBMW]

Anyone have or know who has my TMS 10mm spacers? I am home now and I'd like to locate them so that I can get my hands on them again. Thanks!

Also, still looking for a set of 7s or 8s if anyone has any to swap.

[Avetiso]

Anyone have or know who has my TMS 10mm spacers? I am home now and I'd like to locate them so that I can get my hands on them again. Thanks!

Also, still looking for a set of 7s or 8s if anyone has any to swap.

I still have them. Shoot me your address and I'll ship them out tomorrow.

Sent from my SM-G900T using Tapatalk

[JupiterBMW]

Well, are you interested in keeping them? I'm thinking about selling them...

[Avetiso]

Well, are you interested in keeping them? I'm thinking about selling them...

Not really. Sold my ZHP so I'd have no use for them.

Sent from my SM-G900T using Tapatalk

[BCS_ZHP]

I should have a pair of 10mm Burger Tuning spacers with black lug bolts available after this weekend. We current have 15mm spacers in place with these lug nuts but going to studs and fancy lug nuts this weekend GIPS everything arrives in time. LMK if anyone is interested in a set of 10mm with lug bolts.
Bruce

[BimmerWill]

I should have a pair of 10mm Burger Tuning spacers with black lug bolts available after this weekend. We current have 15mm spacers in place with these lug nuts but going to studs and fancy lug nuts this weekend GIPS everything arrives in time. LMK if anyone is interested in a set of 10mm with lug bolts.
Bruce
Pm sent

[UdubBadger]

You need 2 sets?


Goin' HAM mobile

[Taliben]

Anybody got a small 3mm or 5mm spacer that I can borrow to test fit my rear?

[BCS_ZHP]

FWIW - Noticed this morning that Burger Motorsports (Burgertuning.com) has all their wheel spacer sets on sale for $99 and that includes the extended lug bolts.

[ELCID86]

FWIW - Noticed this morning that Burger Motorsports (Burgertuning.com) has all their wheel spacer sets on sale for $99 and that includes the extended lug bolts.
Good deal. I will be selling or lending a set of 15mm B/M spacers soon.

[johnrando]

Joop, did you send Derek the bolts too, or just the 3mm spacers?

[JupiterBMW]

Just the spacers. No need for extended bolts with 3mm spacers... You need??

[Taliben]

Just the spacers. No need for extended bolts with 3mm spacers... You need??

I would like to borrow them if johnrando doesn't want em. I need to test fit these wheels.

[JupiterBMW]

I would like to borrow them if johnrando doesn't want em. I need to test fit these wheels.

Are you adding spacers? You don't need extended lugs just for wheels.


iPhone 5S. Tapatalk Pro. BOOM

[Taliben]

Are you adding spacers? You don't need extended lugs just for wheels.


iPhone 5S. Tapatalk Pro. BOOM

Oh shit sorry, I thought you meant the actual 3mm spacers haha. Yeah I just need to borrow some 3mm or 5mm spacers if anyone has any

[johnrando]

To be clear, you do not need extended lugs for the 3mm spacers?

[JupiterBMW]

TaliBen- nope, already loaning out my 3mm spacers.

Rando- no need for extended lugs on 3mm spacers.


iPhone 5S. Tapatalk Pro. BOOM

[johnrando]

Thanks Joop.

[danewilson77]

Thanks Joop.

Yeah....I think at 10mm you need to get the extended lugs.

[JupiterBMW]

Yeah....I think at 10mm you need to get the extended lugs.

Oh for sure. I will prolly run them even with the 7mm spacers. Which I still have to order btw.


iPhone 5S. Tapatalk Pro. BOOM

[derbo]

I thought even at 5mm you would need it. :stumped

[JupiterBMW]

I thought even at 5mm you would need it. :stumped

I would say 5mm is an either way situation. If I had them I would run them, but if not, I wouldn't let it stop me from installing and driving the car. Definitely run them at wider spacers, less than 5mm not a huge deal.


iPhone 5S. Tapatalk Pro. BOOM

[UdubBadger]

Wil let me know you got the 10mms I sent you ok


Goin' HAM mobile

[BimmerWill]

Wil let me know you got the 10mms I sent you ok


Goin' HAM mobile
I did thanks again! They're in excellent shape. Im gonna throw them on as soon as I get this drivetrain situated and back together.

[UdubBadger]

Sahweet


Goin' HAM mobile

[BimmerWill]

Anyone have some extra extended lug nuts I can buy or borrow? Really need them for 20 mm to determine if my wheels will fit with the 20 mm spacers my buddy made.

[derbo]

Joop,

Who is next in line for these 3mm spacers? I'm done with them. JR?

[johnrando]

Hopefully it's me, I'd like to try them out.

[derbo]

Hopefully it's me, I'd like to try them out.


I might be buying from Joop. If he does accept my offer, I can send it to you still so you can try them first before they go on my car permanently. :)

[johnrando]

That would be appreciated, thanks for that offer.

[derbo]

That would be appreciated, thanks for that offer.

I just bought them from Joop. I'll head to the Post office tomorrow at lunch and the spacers will be on their way to you. :)

[JupiterBMW]

JP....?? :shifty

You mean JooP :biggrin

[Smilez]

If you guys need new ones. I sell them :)

[johnrando]

You have 3mm Ray?

[derbo]

JP....?? :shifty

You mean JooP :biggrin


edited. :) I talk to JP too much and I tend to write that :X

[Smilez]

You have 3mm Ray?

I made a thread check it out.

[johnrando]

I did but when I looked 3's weren't listed.

[Smilez]

You know what. I only have 5mm. Let me check with manufacture see of they have any 3s

[BimmerWill]

Think might have gotten it a little too close lol
http://img.tapatalk.com/d/14/08/11/umuduheq.jpg
http://img.tapatalk.com/d/14/08/11/su2u3u9u.jpg

Looks good but I'm gonna have to get a roll or have my friend cut down the spacers to 15 mm.

[derbo]

wait CUT?!

[BimmerWill]

Yeah he made them for me lol. He's a machinist.

[derbo]

Oh okay. Just reading that, I was scared it would be ghetto like cutting springs :facepalm. Carry along! How big are those currently?

[danewilson77]

Oh okay. Just reading that, I was scared it would be ghetto like cutting springs :facepalm. Carry along! How big are those currently?
Cut springs are for ballers.

http://img.tapatalk.com/d/14/08/11/dyjy2yhe.jpg

http://img.tapatalk.com/d/14/08/11/8edaga6y.jpg

The friendliest forum on the planet!

[johnrando]

3mm's checked out. Lmk if you have them Ray (qty 4). Derek, will mail yours back tomorrow.

[derbo]

3mm's checked out. Lmk if you have them Ray (qtr 4). Derek, will mail yours back tomorrow.

Sounds good.

I'll pm you my work address.

sent from Moto X Dev Edition

[derbo]

Cut springs are for ballers.

http://img.tapatalk.com/d/14/08/11/dyjy2yhe.jpg

http://img.tapatalk.com/d/14/08/11/8edaga6y.jpg

The friendliest forum on the planet!

Oh Dane. LOL.

[BimmerWill]

They are 20 mm right now

[johnrando]

Anyone have 7's or 7.5's with the lugs?

[Tnhl1989]

Does anyone have a 5mm or a 7.5mm I could try? My front tires are way too far out with 15mm :(

17250
17251

[ryankokesh]

Does anyone have a 5mm or a 7.5mm I could try? My front tires are way too far out with 15mm :(

17250
17251

I think I have a 5mm somewhere. Pm me if I forget to check...


Sent from my iPhone

[UdubBadger]

Looking for 7.5's or 10s with bolts please. I have none to trade but will purchase.

[UdubBadger]

I lied, want a 15mm

[UdubBadger]

I lied, want a 10/12.5/15mm

[UdubBadger]

Anyone? Might prefer 10s right now. Found some 15s on m3f.n


GoingHAM mobile

[Pip]

You've had too much coffee

[UdubBadger]

I don't drink coffee and it was 11:30pm lol


GoingHAM mobile

[Smilez]

did you just say you don't drink coffee?

BLASPHEMY

[UdubBadger]

By my posts you should be able to see I clearly don't need it. :rofl


GoingHAM mobile

[ryankokesh]

Yeah, it's in everyone's best interest.

I might have 12s I don't use this summer... kinda unsure at this point though.

[WOLFN8TR]

I lied, want a 10/12.5/15mm

Me too!


Found some 15s on m3f.n

Good catch. How much?

[UdubBadger]

Yeah, it's in everyone's best interest.

I might have 12s I don't use this summer... kinda unsure at this point though.

Need them asap


GoingHAM mobile

[UdubBadger]

Me too!



Good catch. How much?

TMS (best kind Cuz it has the notches for dismount) w/bolts $75 shipped


GoingHAM mobile

[ryankokesh]

Need them asap


GoingHAM mobile

I use them on the rears for winter...

[UdubBadger]

Then you are of no use to me. Be gone!


GoingHAM mobile

[ryankokesh]

Then you are of no use to me. Be gone!


GoingHAM mobile

http://www.miataturbo.net/attachments/insert-bs-here-4/83477d1374611119-random-pictures-thread-only-rule-post-here-more-entertain-me-not_cool.jpg

[WOLFN8TR]

TMS (best kind Cuz it has the notches for dismount) w/bolts $75 shipped


GoingHAM mobile

Nice!!

[UdubBadger]

http://www.miataturbo.net/attachments/insert-bs-here-4/83477d1374611119-random-pictures-thread-only-rule-post-here-more-entertain-me-not_cool.jpg

http://tapatalk.imageshack.com/v2/15/01/30/bfd869d72b0104e5ade73ddef4f4ad67.jpg


GoingHAM mobile

[ryankokesh]

http://tapatalk.imageshack.com/v2/15/01/30/bfd869d72b0104e5ade73ddef4f4ad67.jpg


GoingHAM mobile

:drool


Sent from my iPhone

[SoDelBMW]

I was about to post a for sale thread for my 10mm and 12.5 I have sitting around if that helps.

[WOLFN8TR]

I was about to post a for sale thread for my 10mm and 12.5 I have sitting around if that helps.

I might be interested, shoot me a PM with the info and some pics.

[CarbonZHP]

Would anyone be interested in swapping my 5s for your 10s? Dont know if my 5s will be enough.

[UdubBadger]

I have a set of 15's with bolts and 20's with bolts (both Turner).

Anyone got some 10's or 12.5's they want to trade? Really hoping for Turners in return.

[rkneeshaw]

I have 5's and 10's, both H&R. The 10's come with longer bolts from H&R.

I'm interested in swapping to 8mm and 10mm Turners. And I would need longer bolts for both.

[QC_ZHP]

Anyone have 10s they want to sell? Won't need bolts

[UdubBadger]

guess everyone needs 10's

[Taliben]

Anybody got any 5mm they wanna sell/lend me for a test fit?