FS: full set OEM Style 135's

[midlandtech]

Forsale 1 set of style 135's. Rims have a few spots of curb rash and knicks from PO. I would refresh them if I was keeping them but with the recent bills incurred with the soon to come new addition to the family I need what ever money I can scratch up. Posting here for a week or so before I attempt posting on the KC craigslist. Asking 500 plus shipping and am willing to accept reasonable offers (I'm not in a position to be picky). wheels will come with BMW storage totes. I will take better pictures tomorrow but for now here are a few.

http://i152.photobucket.com/albums/s165/midlandtech/wheel_zpsbac93b9f.jpg
http://i152.photobucket.com/albums/s165/midlandtech/wheel1_zps7c5b5fd3.jpg
http://i152.photobucket.com/albums/s165/midlandtech/sidewheel_zpsa8f7b19b.jpg

[seabassx]

Could you take closeups of the two that don't already have them?

And I would normally PM this, but how much shipped to 22180? (You can PM back if you want to avoid cluttering the thread).

EDIT: I see that you said you would take better photos. I can read good.

[midlandtech]

Could you take closeups of the two that don't already have them?

And I would normally PM this, but how much shipped to 22180? (You can PM back if you want to avoid cluttering the thread).

EDIT: I see that you said you would take better photos. I can read good.

PM sent


Steve

[mimalmo]

Somebody needs to buy these so they can run 4 rears in the summer and 4 fronts in the winter - perfect OEM+ setup.

[alexandre]

Do they come with rubber? If so what are the details?

[Silber92]

PM sent.

Thanks!

[cakM3]

damn Steve...............

[midlandtech]

damn Steve...............

Ya had plans for powder coating in spring but the baby takes priority.

Wheels have rubber but its a set of cheap all seasons that are noisy and difficult to balance I would replace them. Personally bit I suppose you could use them through winter if needed (1 will need replaced for sure due to a cracked sidewall)

[cakM3]

Sorry that you have to sell these but I can relate.....family needs have to come first...

GLWS on these wheels though.....if I didn't have too many sets of wheels already in my garage....I might be looking at these.....I'm such a wheel whore! :)

[midlandtech]

Sorry that you have to sell these but I can relate.....family needs have to come first...

GLWS on these wheels though.....if I didn't have too many sets of wheels already in my garage....I might be looking at these.....I'm such a wheel whore! :)

Lol thanks hopefully they go to a good home =)

Sent from my Nexus 10 using Tapatalk

[jgt_zhp]

Darn, Steve,

I was going to hit you up and see if you were interested in the extra set of 135s I've got in my garage. Guess you already have enough. If you find anybody nearby who's looking for two sets (square summer and winter, maybe?), let me know. We could go in together and make a killing.

[midlandtech]

Darn, Steve,

I was going to hit you up and see if you were interested in the extra set of 135s I've got in my garage. Guess you already have enough. If you find anybody nearby who's looking for two sets (square summer and winter, maybe?), let me know. We could go in together and make a killing.

If there are people interested in doing that I would have no problem going in together. I hope to get them sold in a week or so.... Babies are expensive =)

Sent from my Nexus 10 using Tapatalk

[midlandtech]

Here are pictures of the wheels as of today:

Front wheel 1: no major curbage but chips along several spokes as seen in the pictures.
http://i152.photobucket.com/albums/s165/midlandtech/front12_zps1b624e18.jpg
http://i152.photobucket.com/albums/s165/midlandtech/front13_zps19a7ce80.jpg
http://i152.photobucket.com/albums/s165/midlandtech/front1_zps5b2842fa.jpg
Front wheel 2: Less chips and knicks than in the previous wheel no curbage the mark at the edge of the wheels seem to be areas of less paint or clear. no damage is done to the primer or metal underneath, knick near center cap
http://i152.photobucket.com/albums/s165/midlandtech/front22_zpsaef9f481.jpg
http://i152.photobucket.com/albums/s165/midlandtech/front23_zps500d6705.jpg
http://i152.photobucket.com/albums/s165/midlandtech/front2_zpsc855a126.jpg
Rear wheel 1: a few chips. apparent clear coat peel in areas
http://i152.photobucket.com/albums/s165/midlandtech/rear12_zpsb8dd52c7.jpg
http://i152.photobucket.com/albums/s165/midlandtech/rear1_zpsa7fa70f6.jpg
http://i152.photobucket.com/albums/s165/midlandtech/rear13_zpsd9d92eea.jpg
Rear wheel 2: same issue as the rear wheel 1
http://i152.photobucket.com/albums/s165/midlandtech/rear22_zps1544cb17.jpg
http://i152.photobucket.com/albums/s165/midlandtech/rear23_zps217b2c2d.jpg
http://i152.photobucket.com/albums/s165/midlandtech/rear2_zps4a526b91.jpg

as I stated above I think that they would be perfect for a powder coating and there are no cracks or bends that I am aware of. Open to offers.

[midlandtech]

http://img.tapatalk.com/d/13/10/31/ady2u7y3.jpg
Pic of the included totes

[midlandtech]

Sale Pending

[danewilson77]

http://img.tapatalk.com/d/13/10/31/ady2u7y3.jpg
Pic of the included totes

Must have been the totes :)

Sent from my S4 > Mason, OH

[midlandtech]

lol you know it

[Silber92]

Thanks again Steve, it was good meeting you and the Mrs.

Rims are in better shape than I had hoped, and look like they'll clean up great.

Cheers!

Michael

[ELCID86]

Glad ya'll got the deal done.