PDA

View Full Version : WTB: 650 lb/in 2.5" ID coilover springs



LivesNearCostco
10-03-2013, 04:10 PM
Bought some used ones off M3forum.net. Installed, now wondering if 525/650 is too stiff for daily driving. Hmmm...
===
Looking to buy some 650 lb/in coilover springs, 2.5" ID, 6.0" or 6.5" in length.
Perfect would be Eibach 600.250.650, but will consider Swift and Hyperco springs too.

Might even consider 2.25" ID springs if I get desperate (can change rear height adjusters for $44 to fit 2.25"), but by that point I might just break down and buy new springs.