M-Tech 330i for parts

[Avetiso]

Dedicating a new thread for the parts car. Currently being disassembled. All dibs and requests go here.

Sold:
Fuel door actuator
Door handle carrier (driver door)
Driver side rear door exterior trim

Reserved:
Steering airbag
PDC system
Front seats

Sent from a junkyard via GS4.

[fredo]

Just curious. What's that on the rear bumper ? Looks like parking sensors. But, I don't believe they were available in that model.

[E_Rak]

Parking sensors they are!

[fredo]

Interesting fact. I learned something new today.

[Avetiso]

Going to leave this thread here for a few days, then, it goes to the hounds at E46F. :)

[Johnmadd]

How much for the cluster? I really just need the button that sets the clock :-/

[Avetiso]

How much for the cluster? I really just need the button that sets the clock :-/
I think this works best for both of us. I'm going to be gutting this cluster because I need the housing for my ZHP cluster. I can probably sell you just the internals... How does $50 plus shipping sound? PM me if you want to discuss it further.

[Tnhl1989]

I'll be interested in the whole PDC set up as well.

[Avetiso]

I'll be interested in the whole PDC set up as well.

PDC?

Sent from a junkyard via GS4.

[PirateZHP]

How are the tail lights? They look decent from the pics, but you have eyes on them. I have cracked one, and have been trying to decide if I am going with the stock look or to the Depo lights. I think the stock (amber turns) look good on black. There are no differnces in the stock tails from non-zhp to zhp, right?

[Avetiso]

How are the tail lights? They look decent from the pics, but you have eyes on them. I have cracked one, and have been trying to decide if I am going with the stock look or to the Depo lights. I think the stock (amber turns) look good on black. There are no differnces in the stock tails from non-zhp to zhp, right?

No difference. I don't recall any cracks but they have scratches on them. Can be buffed out, though.

Sent from a junkyard via GS4.

[alexandre]

PDC?

Sent from a junkyard via GS4.

Park distance control. Those 4 sensors in the bumper valence and the module they go to. 2nd dibs on that if Tony backs out.

Do you think the wheels can still be used ?

[Tnhl1989]

Park distance sensor system. It looks like it is in decent shape and I would have to retrofit it into my car. Personally I would like to have the pdc over the rearview camera.

[Avetiso]

Park distance control. Those 4 sensors in the bumper valence and the module they go to. 2nd dibs on that if Tony backs out.

Do you think the wheels can still be used ?
The other three look fine, just some curbage/scratches. I'll have to take off the fourth and see, but I think it's still good, too.

[Johnmadd]

I think this works best for both of us. I'm going to be gutting this cluster because I need the housing for my ZHP cluster. I can probably sell you just the internals... How does $50 plus shipping sound? PM me if you want to discuss it further.

Ill send pm later.

[WOLFN8TR]

How much for the Airbag? Doesn't look like it went off correct ?

[Avetiso]

How much for the Airbag? Doesn't look like it went off correct ?
I told thnl1989 $150 plus shipping, but he is in line for it.

[Tnhl1989]

I told thnl1989 $150 plus shipping, but he is in line for it.

Thanks! Pretty much I remove the decal in the middle of mine and that's why I am looking for another one.

[Avetiso]

Just PM me when ready to do it.

Sent from a junkyard via GS4.

[Avetiso]

Interior has been gutted for the most part.

Sent from a junkyard via GS4.

[Crickett]

Any chance it has a HomeLink module?

http://i1234.photobucket.com/albums/ff401/Kayger12/2011-02-25_18-17-28_285.jpg

[Hornung418]

Need the front passenger door handle cover where the mirror motor control would be if th car was RHD.

Is it black or gray?

GS3 + TT4

[Avetiso]

No homelink. Justin, I have it, but it's sand color.

Sent from a junkyard via GS4.

[alexandre]

Need the front passenger door handle cover where the mirror motor control would be if th car was RHD.

Is it black or gray?

GS3 + TT4

Shouldn't be more than a few bucks at the dealer.

[ryrules1]

How does the front roundel look? Is the clear coat in good shape? If so I will take it.

[Avetiso]

How does the front roundel look? Is the clear coat in good shape? If so I will take it.
Faded and clear coat is peeling. It's trash.

[ryrules1]

Faded and clear coat is peeling. It's trash.

Thanks, same as mine :) I will pick one up from the dealership this week.

[Avetiso]

Alrighty, guys. I plugged in my cluster and turns out, the car only has 109k miles! Awesome. I might actually get something for the tranny/engine.

[Avetiso]

Does anyone have any idea what I can sell the engine or tranny for? Or what I can get for them together?

[alexandre]

Check on car-part.com to get an idea what they retail for.

[E_Rak]

That will make up your entire purchase price right there!

[Tnhl1989]

Tranny I just sold for 500. I think an engine goes for about 700 - 1000 alone. You can totally make up how much you paid for it easily. Just takes some time. Also differentials are also a hit :)

[Avetiso]

Bump. Guys, I can pull some deals if you need anything. Sorry I don't have anything worth retrofitting, though.

[Avetiso]

Sent from a junkyard via GS4.

[Johnmadd]

Nice! I don't use gloves either.

[alexandre]

Did you pull the engine or you just removed front bumper & al.?


Nice! I don't use gloves either.

+1. They always end up tearing into 1000 pieces lol.

[Vas]

Foglight connectors?

[Avetiso]

Foglight connectors?

Need them? I think both sides should still be intact.

Sent from a junkyard via GS4.

[Avetiso]

Nice! I don't use gloves either.
I hate gloves.

Did you pull the engine or you just removed front bumper & al.?



+1. They always end up tearing into 1000 pieces lol.
Haven't pulled the motor yet, but that's the plan.


Sent from a junkyard via GS4.

[Vas]

Need them? I think both sides should still be intact.

Sent from a junkyard via GS4.

If you can snap a picture of them ( unsure if they are the same or not as the zhp ) i would take them,

[Avetiso]

If you can snap a picture of them ( unsure if they are the same or not as the zhp ) i would take them,

Okay but I only get home at 730 my time.

Sent from a junkyard via GS4.

[Vas]

Not a problem at all :)

thanks

[Avetiso]

Both connectors are still there.

Sent from a junkyard via GS4.

[NorCal-Dimitri]

Just curious, how much for a front window regulator? (No shipping)

[Avetiso]

Just curious, how much for a front window regulator? (No shipping)

Which side?

Sent from a junkyard via GS4.

[NorCal-Dimitri]

Which side?

Sent from a junkyard via GS4.

My bad, left side.

[Avetiso]

My bad, left side.
Um, assuming it still works, $40? I can't test it, don't have the key. I could take it apart and make sure everything is okay visually, but you'd have to install and test it yourself, which kinda sucks. Get back to me on Friday and I'll see if I can take it apart for you.

[NorCal-Dimitri]

Um, assuming it still works, $40? I can't test it, don't have the key. I could take it apart and make sure everything is okay visually, but you'd have to install and test it yourself, which kinda sucks. Get back to me on Friday and I'll see if I can take it apart for you.

$40 sounds sweet for a working regulator. I need to replace mine and I'm still not familiar enough with the process to be sure whether I want to do it myself. I'll shoot you a pm if I decide to go through with it. Thanks!

[Avetiso]

$40 sounds sweet for a working regulator. I need to replace mine and I'm still not familiar enough with the process to be sure whether I want to do it myself. I'll shoot you a pm if I decide to go through with it. Thanks!

I can help you out if need be. I've done it before.

Sent from a junkyard via GS4.

[NorCal-Dimitri]

I can help you out if need be. I've done it before.

Sent from a junkyard via GS4.

That would be awesome. How long does it take to replace? I don't want to take up too much of your time.
I have no idea when I'll be in sac though and I wouldn't want to use that much gas to do one errand. I'm a couple hours away (chico). If something comes up soon I'll definately take you up on that offer. I'm really eager to get it fixed since it's starting to rain more and the window won't roll completely up.

[Avetiso]

That would be awesome. How long does it take to replace? I don't want to take up too much of your time.
I have no idea when I'll be in sac though and I wouldn't want to use that much gas to do one errand. I'm a couple hours away (chico). If something comes up soon I'll definately take you up on that offer. I'm really eager to get it fixed since it's starting to rain more and the window won't roll completely up.
It shouldn't take more than two or three hours on your first attempt. It's a tight fit to work in, so it's a PITA, but not 'difficult.' You should be able to do it yourself, but if you ever find yourself around here, that can work, too.

[alexandre]

That would be awesome. How long does it take to replace? I don't want to take up too much of your time.
I have no idea when I'll be in sac though and I wouldn't want to use that much gas to do one errand. I'm a couple hours away (chico). If something comes up soon I'll definately take you up on that offer. I'm really eager to get it fixed since it's starting to rain more and the window won't roll completely up.

Definitely doable in 2 hours. It's the first repair I had to do on my car (rear passenger window fell in the door on the way back from the seller's hometown)... Didn't find it too hard although it's a bit of a PITA.

Don't forget to do the ziptie reinforcement if it's one of the front windows.

[danewilson77]

That would be awesome. How long does it take to replace? I don't want to take up too much of your time.
I have no idea when I'll be in sac though and I wouldn't want to use that much gas to do one errand. I'm a couple hours away (chico). If something comes up soon I'll definately take you up on that offer. I'm really eager to get it fixed since it's starting to rain more and the window won't roll completely up.

Bout 2 hours.

Sent from my Samsung Galaxy S4

[NorCal-Dimitri]

It shouldn't take more than two or three hours on your first attempt. It's a tight fit to work in, so it's a PITA, but not 'difficult.' You should be able to do it yourself, but if you ever find yourself around here, that can work, too.

Alright, sounds like it's not too bad. I'll give you a heads up if I'm around.


Definitely doable in 2 hours. It's the first repair I had to do on my car (rear passenger window fell in the door on the way back from the seller's hometown)... Didn't find it too hard although it's a bit of a PITA.

Don't forget to do the ziptie reinforcement if it's one of the front windows.

Same happened to me when I bought my zhp. We were test driving and I decided to roll the window up since it was so hot, then suddenly, CRACK! I hear a nasty, nasty sound. The owner looked like he was about to cry.

I'll pm you once I go over the replacement so that I can better understand what you mean by ziptie reinforcement.


Bout 2 hours.

Sent from my Samsung Galaxy S4

Sounds like we have a consensus.

[Hornung418]

Think you can mail me a small plastic part in an envelope?

Looking for the clip that holds the antenna wire in place on the back of the radio...I don't even know if there is part number...but I will investigate further and provide more detail once I find it.

GS3 + TT4

[Avetiso]

Think you can mail me a small plastic part in an envelope?

Looking for the clip that holds the antenna wire in place on the back of the radio...I don't even know if there is part number...but I will investigate further and provide more detail once I find it.

GS3 + TT4

This clip?

Sent from a junkyard via GS4.

[Hornung418]

That's the one!!

[Avetiso]

That's the one!!

Text me your address, I'll mail it out tomorrow.

Sent from a junkyard via GS4.

[Hornung418]

Sent!

[danewilson77]

Mi Familia!

Sent from my Samsung Galaxy S4

[Avetiso]

Shipped. :)

Sent from a junkyard via GS4.

[Johnmadd]

Shipped. :)

Sent from a junkyard via GS4.

:thumbsup

[Johal E32]

Dario.

Can I buy the M54B30 intake manifold with the DISA valve? I don't need the throttle body..

[Avetiso]

Dario.

Can I buy the M54B30 intake manifold with the DISA valve? I don't need the throttle body..
Hm, I would have liked to sell the engine whole. The DISA valve flap is broken, and I actually have a guy interested in it atm, but he's not very serious.

PM and offer for it.

[alexandre]

Dario.

Can I buy the M54B30 intake manifold with the DISA valve? I don't need the throttle body..

Buy the whole drive train and make it a 330iT!

[Avetiso]

Buy the whole drive train and make it a 330iT!
Johal, I can cut you a deal on it, dude. I need the money.

[johnrando]

I replaced my DISA with a Gold unit. It still works fine though. If you're interested, I'll sell at a good price.

[Avetiso]

Bump.

[Avetiso]

Bump. Also have a set of style 68's (5). Can sell to Mafia for a deal.

[alexandre]

Bump. Also have a set of style 68's (5). Can sell to Mafia for a deal.

Staggered or all the same size? Pm me deets, might be interested for my winter setup.


iP4S + TT2

[Avetiso]

Staggered or all the same size? Pm me deets, might be interested for my winter setup.


iP4S + TT2

Staggered. I'll pm you a bit later, cleaning my interior atm.

[derbo]

Hey Dario, are the Front brake calipers and caliper brackets still good on this car?

[Avetiso]

Hey Dario, are the Front brake calipers and caliper brackets still good on this car?

Yes sir.

[derbo]

What did you want for them?

[Avetiso]

What did you want for them?
$60. They are CA calipers! Rust free, lol. Unlike mine. :shifty

[derbo]

Let me get back to you Dario! I am unsure I am redoing my brakes to stoptech, or going back to stock 330i calipers at the moment.

[Johal E32]

Dario. Still got the wheels? How much for the whole set with tires?

[LivesNearCostco]

How much for rear calipers and brackets?

[Avetiso]

Let me get back to you Dario! I am unsure I am redoing my brakes to stoptech, or going back to stock 330i calipers at the moment.
Sure thing.

Dario. Still got the wheels? How much for the whole set with tires?
I'm selling them for $270, but I have a guy who is coming on Friday and is 95% sure he will buy.

How much for rear calipers and brackets?
$50. Could throw in some pads and rotors all together for $100 shipped.

[Avetiso]

EDIT: Guy texted me. Might still sell them.

Anyway, $270 for 5 M68 wheels, one is bent but fixable. Won't find that anywhere else.

[Tlandreth22]

EDIT: Guy texted me. Might still sell them.

Anyway, $270 for 5 M68 wheels, one is bent but fixable. Won't find that anywhere else.

Damn Avetiso, $270 for all 5? I got $400 for 4 of mine, and I kept the spare :)


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[Avetiso]

Damn Avetiso, $270 for all 5? I got $400 for 4 of mine, and I kept the spare :)


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

It was a tough sell, and I really needed the money. One wheel was bent and scuffed pretty badly, not worth much. Other wheels had some rash and flaking finish, so it wasn't worth too much.

[derbo]

is the splash shield still in tact?

http://www.ecstuning.com/BMW-E46-325i-M54_2.5L/Search/51718268344/ES130099/

Highly unlikely lol

http://c1552172.r72.cf0.rackcdn.com/393196_x600.jpg

[Avetiso]

is the splash shield still in tact?

http://www.ecstuning.com/BMW-E46-325i-M54_2.5L/Search/51718268344/ES130099/

Highly unlikely lol

http://c1552172.r72.cf0.rackcdn.com/393196_x600.jpg

Oh yeah, it's gone...

Sent from my SM-N900T using Tapatalk

[az3579]

Got a seat belt receptacle for the driver's side front seat? Mine is starting to tick me off. :(

Sent from my DROID RAZR HD using Tapatalk

[Avetiso]

Got a seat belt receptacle for the driver's side front seat? Mine is starting to tick me off. :(

Sent from my DROID RAZR HD using Tapatalk

Trolololo you've asked me three times already. :rofl

No, sir. Sold it already.

Sent from my SM-N900T using Tapatalk

[az3579]

Trolololo you've asked me three times already. :rofl

No, sir. Sold it already.

Sent from my SM-N900T using Tapatalk

Trololol I don't recall you answering. :p
Thanks anyway.

Sent from my DROID RAZR HD using Tapatalk

[derbo]

Oh BP... Lol


Sent from my iPad

[QC_ZHP]

Steering coupler?

[Avetiso]

Steering coupler?
Probably... but why not buy a new one?

[QC_ZHP]

I just picked up an AKG coupler bushing and it uses the stock flex shaft. Thinking about buying another and assembling it beforehand for a simple swap

[Avetiso]

I just picked up an AKG coupler bushing and it uses the stock flex shaft. Thinking about buying another and assembling it beforehand for a simple swap
Oh ok. I could probably get it when I pull the engine in the coming weeks

[QC_ZHP]

Sounds great. No rush, I have a few other issues to address before i tackle this project

[Avetiso]

Bump.

[bshovers]

how much for this piece of trim missing on the car I plan to purchase?12774

[Avetiso]

how much for this piece of trim missing on the car I plan to purchase?12774

The trim I have is chrome not gloss black. Sorry.

Sent from my SM-N900T using Tapatalk

[bshovers]

The trim I have is chrome not gloss black. Sorry.

Sent from my SM-N900T using Tapatalk
sorry didn't look that closely

[slater]

how's the side mirror glass, dario?

peter

[Avetiso]

how's the side mirror glass, dario?

peter

Sold them both already. Sorry.

Sent from my SM-N900T using Tapatalk

[Avetiso]

Bump. Anyone need some stuff? I have an alternator, ac compressor, PS pump, intake manifold, and other stuffs.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

[danewilson77]

I need a splash shield for Justins car. Tough to ship though.

Samsung Galaxy S5...

[Hornung418]

I need a splash shield for Justins car. Tough to ship though.

Samsung Galaxy S5...
Just reread the thread looking for random parts. Derek inquired about it. It's gone.

[danewilson77]

No problem

Samsung Galaxy S5...

[Hermes]

Do you haz fog lights? I only need one side, can't remember which. Need to return the red car to stock

[Avetiso]

Do you haz fog lights? I only need one side, can't remember which. Need to return the red car to stock

I have one laying round. Tell me what side.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

[Hermes]

Passenger side please

13613

[Avetiso]

Passenger side please

13613
Only have driver. :(

[Hermes]

No prob

[bshovers]

Secondary air pump valve?


Sent from my iPhone using Tapatalk

[Avetiso]

Secondary air pump valve?


Sent from my iPhone using Tapatalk

Ha, just sold this to BP.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

[bshovers]

Ha, just sold this to BP.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

Dang what about the pump itself. I still need to diagnose where the problem is anyways.


Sent from my iPhone using Tapatalk

[Avetiso]

Dang what about the pump itself. I still need to diagnose where the problem is anyways.


Sent from my iPhone using Tapatalk

Yeah sold that as well.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

[Avetiso]

Dang what about the pump itself. I still need to diagnose where the problem is anyways.


Sent from my iPhone using Tapatalk

Message az3579. I'm not sure he needs it anymore.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

[Johnmadd]

Only have driver. :(

Is the lens clear or fluted?

[Avetiso]

Is the lens clear or fluted?

Fluted.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

[Johnmadd]

Fluted.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

:facepalm ok

[gronsay]

do you have the front brake calipers? I am looking to swap out my 325 brakes...

[Avetiso]

do you have the front brake calipers? I am looking to swap out my 325 brakes...
I sure do. Shoot me a PM and we'll talk about it!