Corner Light Condensation

[MiniD]

Pretty pissed to find my OEM clear corner light fogged up with condensation.

Is there a way to dry the water out?

[illirep]

This happened to me in the past. If you leave it out, it will dry. You'll likely need to replace them, unless you can find a way to replace the gaskets....

These are on ecstuning.com brand new for $80.

[EmDeeAr]

Mine are like that too :/

[Avetiso]

Check the gaskets on the turn signal sockets.

Sent from a junkyard via GS4.

[az3579]

Throw some silica gel packets in there. I also heard rice does the same thing...



This happened to me in the past. If you leave it out, it will dry. You'll likely need to replace them, unless you can find a way to replace the gaskets....

These are on ecstuning.com brand new for $80.

I think that $80 is for a pair. Might as well replace them as a pair.

[TomTomTuning]

Let it dry then use some black silicone on the edges to "re-seal" it?

Something like this? http://www.amazon.com/gp/product/B000AL6WLA/ref=noref?ie=UTF8&psc=1&s=automotive

[MiniD]

Have my ugly ambers in now. Probably will end up buying new corners then selling my old ones on here.

[trancenation]

How long have you had those oem clears for?

[wertyu78]

I have/had the same issue. I drilled very small holes in the corner of each corner light on the side(unseen). I haven't had a problem since...


Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m/)

[MiniD]

Ironically enough, there is no more condensation. Did nothing...it just dried up.

[wertyu78]

Ironically enough, there is no more condensation. Did nothing...it just dried up.

Sounds about right


Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m/)