Tom's Black Sapphire ZHP - Maintenance & Mod Ledger

[TomTomTuning]

Figured Id start one of these... :)

Purchase Date: July 4th 2013 138,XXX

Specs:
2004 330i ZHP
Steptronic Automatic
Black Sapphire
Black Interior
Alcantara Steering Wheel
Black Cube Trim
Performance & Cold Weather Packages
Bi-Xenon HID Headlights


Mods:
18" CSL Replica Wheels - UNKNOWN (UNKNOWN)
Smoked Corner Lights- UNKNOWN (UNKNOWN)
Black Side Markets - UNKNOWN (UNKNOWN)
CCFL Angel Eyes - UNKNOWN (UNKNOWN)
OEM Front License Plate Delete - 138k (07/09/13)
OEM Driver Side Mirror Glass -138k (07/09/13)
OEM Black Carpets - 138k (07/09/13)
LED Interior Lights -138k (07/10/13)
LED Side Marker bulbs- 138k (07/10/13)
LED License Plate bulbs - 138k (07/10/13)
CobyWheel Alcantara Steering Wheel - OEM Grey w/ Black Stitching 139K (07/16/13)
eBay Black Shark Fin 139K (07/17/13)
Bimmian Mobile Device Mount 139 (07/19/13)
Orion V2 LED Angel Eyes 139K (07/23/13)
BMW Performance Intake 139K (07/24/13)
OEM Clear Corners 140K (07/31/2013)
OEM Clear Side Markers 140K (07/31/2013)
Depo R/C/R Tail lights 141K (08/09/2013)
Eonon D5150 Nav Headunit 141K (08/09/2013)
Backup Camera (08/09/2013)
TRS Retro-Quick System - HID Projectors (08/18/13)
6000K HID Bulbs (08/18)13

Maintenance:
New ZKW headlight lenses - UNKNOWN (UNKNOWN)
Replaced defective fuel pump - 137k (07/03/13)
New Mann Filter Air Filter - 138k (07/11/13)
New Filter Air Cabin Filter - 138k (07/11/13)
New NGK Laser Platinum Spark Plugs BKR6EQUP - 138k (07/11/13)
New Mahle Fuel Filter - 7/11/13 - 138k
Performed Oil Change with OEM BMW 5w30 & OEM Filter -138k (07/11/13)
Replaced A/C Belt - 138k (07/11/13)
Leatherique front/rear seats - 139K (07/16/13)

State Inspection and Emissions - 7/11/13 - 138k

Purchased (Not yet installed):
OEM Auto-Dimming rear view mirror w/ compass

Plans & Wish List:
Lambar Support Retrofit
Considering a Arqray lip.

Photos:

07/04/13 - First day with the car
http://i.imgur.com/VSv3fHth.jpg

07/04/13 - First day with the car
http://i.imgur.com/c3gaZdIh.jpg

07/09/13 - Installed plate delete
http://i.imgur.com/3bdAFOB.jpg

07/10/13 - Sending Mike from Cobywheel a photo of my steering wheel
http://i.imgur.com/Mq2DpSIh.jpg

07/10/13 - Installed EE Tails but I'm missing the inner. :(
http://i.imgur.com/wz8VmvBh.jpg

07/13/13 - Washed the car today, so I figured Id snap a photo.
http://i.imgur.com/4lBRalgh.jpg

07/13/13 - Road Paint from highway construction, filing a claim with Pen Dot ASAP.
http://i.imgur.com/fSZJaL5h.jpg

07/13/13 - Photo of the interior after detailing it.
http://i.imgur.com/Bkfx1E2h.jpg

07/16/13 - CobyWheel installed - OEM Grey w/ Black Stitching
http://www.zhpmafia.com/forums/attachment.php?attachmentid=9498&d=1374014605

07/23/13 - Installed the Orion V2's
http://www.zhpmafia.com/forums/attachment.php?attachmentid=9568&d=1374601113

07/24/13 - Installed the BMW Performance Intake w/ OEM filter.
http://www.zhpmafia.com/forums/attachment.php?attachmentid=9575&d=1374678119

07/31/2013 - Installed OEM Clear Corners & Side Markers
http://www.zhpmafia.com/forums/attachment.php?attachmentid=9678&d=1375310506

08/09/2013 - Installed Depo R/C/R Tail lights
http://www.zhpmafia.com/forums/attachment.php?attachmentid=9854&d=1376070081

08/18/2013 - Installed TRS Retro-Quick System (Projector retrofit) & 6000K HID Bulbs
http://i9.photobucket.com/albums/a98/boostd240/E46%20TRS%20Retrofit/IMG_8774-15.jpg

[johnrando]

Beautiful. Great list. Please add:

Maintenance item: fix color to code 668, Jet Black. Just kidding. :biggrin

[danewilson77]

Looks great Tom.

HTC DNA, Williamsburg, VA

[Johnmadd]

:like

[TomTomTuning]

I have a bunch of plans for this car, time to get busy!

[ELCID86]

Very nice.


Shawn in VA.
Via thumbs and Tapatalk.

[Vas]

Pretty cool

[TomTomTuning]

Washed the car today, so I decided to snap a photo of the car.

http://i.imgur.com/4lBRalgh.jpg


Oh and check this shit out... Monday-Wednesday the highway I take home from work was under construction, get a load of this crap.
I'm filing a claim with the Penn Dot to have them clean this shit off my car...

http://i.imgur.com/fSZJaL5h.jpg

[danewilson77]

Car looks amazing Tom.

HTC DNA, Williamsburg, VA

[BCS_ZHP]

Tom, clay bar, that stuff will come right off...

[TomTomTuning]

Tom, clay bar, that stuff will come right off...

Right on, I'll try it tomorrow.


Sent from my iPhone using Tapatalk

[TomTomTuning]

Just won a BMW Performance Intake on eBay for $202.50!!! WootWoot! Hopefully it's legit and includes everything. I had to stay up till 3am to snip it. Lol

http://bit.ly/13ZVIgb

9462


Sent from my iPhone using Tapatalk

[Avetiso]

Just won a BMW Performance Exhaust on eBay for $202.50!!! WootWoot! Hopefully it's legit and includes everything. I had to stay up till 3am to snip it. Lol

http://bit.ly/13ZVIgb

9462


Sent from my iPhone using Tapatalk

Ummm. Intake or exhaust? You have a pic of the intake, but it says exhaust.

[TomTomTuning]

Intake, it's almost 4am and I'm half a sleep on my phone, lol. I've corrected it.


Sent from my iPhone using Tapatalk

[BimmerWill]

Congrats!

Sent from my DROID RAZR using Tapatalk 2

[TomTomTuning]

Congrats!

Sent from my DROID RAZR using Tapatalk 2
Thanks, I'm so pumped about it! Free Shipping too!

[TomTomTuning]

I forgot to upload a photo of the interior yesterday.


Ultimate Klasse (http://ultimateklasse.com) Air Freshener
303 Aerospace Protectant
This stuff is amazing, it cleans and projects without leaving a greasy sheen behind.
303 High Tech Fabric Guard
Protects carpet from staining by repelling liquids.
Stoner Invisible Glass
On all of the windows and mirrors
Meguiars Quick Detail
On the door jams


I am cleaning an conditioning the seats later this week with Leatherique.

http://i.imgur.com/Bkfx1E2h.jpg

[danewilson77]

Looks phenomenal Tom.

[TomTomTuning]

Looks phenomenal Tom.
Thanks Dane, slowly but surely I'm cleaning and fixing her up.

[Avetiso]

303 is great stuff.

[TomTomTuning]

So I need new side markers and I'm considering the Depo LED Bar style units, what do ya'll think?

I'm pretty sure I'm swapping our my smoked corners for clear corners, so Id probably go with the clear version of these side markers. But I'm not 100% sure yet.

http://i.ebayimg.com/t/DEPO-02-05-BMW-E46-4D-5D-LIGHT-BAR-AMBER-LED-CLEAR-FENDER-SIDE-MARKER-LIGHTS-NEW-/00/s/Nzk3WDgwMA==/z/jzwAAMXQy7hRYxwD/$T2eC16JHJIIE9qTYI5fUBRY)wCb6,g~~60_3.JPG

[danewilson77]

No. Get OEM clears.

HTC DNA, Williamsburg, VA

[Avetiso]

No. Get OEM clears.

HTC DNA, Williamsburg, VA

+1 DEPO quality is not very good. Both of my side markers wiggled badly.

[danewilson77]

And the gaskets will wear out in about a year.

HTC DNA, Williamsburg, VA

[TomTomTuning]

No. Get OEM clears.

HTC DNA, Williamsburg, VA
Okay, they seem a bit difficult to find...

I found this thread: http://forum.e46fanatics.com/showthread.php?t=816932

[TomTomTuning]

http://www.realoem.com/bmw/showparts.do?model=EV53&mospid=47725&btnr=63_0731&hg=63&fg=10

White Side Markers
Left: 63137165915
Right: 63137165916


TurnerMotorSports:

Euro Clear side markers
http://www.turnermotorsport.com/p-1138-side-markers-pair-euro-clear-e46-sedan-2002-2005.aspx

Genuine BMW Addit. Turn Indicator Lamp, - 63137165915
http://www.turnermotorsport.com/showproduct.aspx?ProductID=147445&SEName=63137165915-genuine-bmw-part

They don't have the right 63137165916, unless the 63137165915 part number includes both (doubt it).

[Avetiso]

I've seen them on ECS Tuning.

[TomTomTuning]

I've seen them on ECS Tuning.

#$%@ yea! Ordering them now!
Left: http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Lighting/Indicator/ES173602/

Right: http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Lighting/Indicator/ES173603/

[danewilson77]

http://www.realoem.com/bmw/showparts.do?model=EV53&mospid=47725&btnr=63_0731&hg=63&fg=10

White Side Markers
Left: 63137165915
Right: 63137165916


TurnerMotorSports:

Euro Clear side markers
http://www.turnermotorsport.com/p-1138-side-markers-pair-euro-clear-e46-sedan-2002-2005.aspx

Genuine BMW Addit. Turn Indicator Lamp, - 63137165915
http://www.turnermotorsport.com/showproduct.aspx?ProductID=147445&SEName=63137165915-genuine-bmw-part

They don't have the right 63137165916, unless the 63137165915 part number includes both (doubt it).

Mine showed up the first day of the meet and I got them from ECSTuning. Just plug in your part numbers.

[TomTomTuning]

Mine showed up the first day of the meet and I got them from ECSTuning. Just plug in your part numbers.
I didn't order it last night because I'm debating if I should order the OEM Clear Corners as well.

On the other hand, I picked up a Mother's Clay Bar kit and removed the road paint on the sides of my car, worked like a charm. Now I just need to clean the wheel well's.

[johnrando]

Nice Tom. And, congrats on the intake. Great price. Did you verify it was the 330 version (and not the 325)?

[TomTomTuning]

Nice Tom. And, congrats on the intake. Great price. Did you verify it was the 330 version (and not the 325)?
Yup sure did, it even had the correct part number listed. Hopefully I get a "Your Package Shipped" email today. Guy only had 11 feedback so I was a bit concerned but for that price I was willing to take a risk. LOL

[derbo]

black sapphire ftw.

[Daddyoh]

black sapphire ftw.

Oh yeah! Congrats bro.
The one pic looks like the ae's are installed. Have you done that yet?
I have a set to install before this weekend...

[TomTomTuning]

Oh yeah! Congrats bro.
The one pic looks like the ae's are installed. Have you done that yet?
I have a set to install before this weekend...
Yup the car came with CCFL Angel Eyes, but I just bought a pair if used Orion V2's from a forum member. :)


Sent from my iPhone using Tapatalk 2

[TomTomTuning]

CobyWheel installed.

OEM grey w/ black stitching. Part of me wishes I got black w/ tri-stitch but what I got is still amazing. phenomenal work by Mike!

9498

[danewilson77]

Looks like Mike's work Tom. Flawless.

MENTION ZHPMAFIA FOR A DEAL @ COBYWHEEL (www.cobywheel.com)

[TomTomTuning]

Looks like Mike's work Tom. Flawless.

MENTION ZHPMAFIA FOR A DEAL @ COBYWHEEL (www.cobywheel.com)
Exactly what I thought when I opened the box.



By the way, the seats are shiny because the leatherique rejuvenation oil is soaking, tomorrow I'll use the Pristine Clean.

[TomTomTuning]

I want a new shift knob!!!

I really like the BMW Performance shift knob 25162155637, I wish the painted area was black though.

http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Interior/Shifter/ES1832941/
http://farm2.staticflickr.com/1211/5176998837_f72b24e87a_z.jpg


Here's some other options:

Bimmian "Updated Look Automatic Shift Knob"

http://www.bimmian.com/Updated-Look-Automatic-Shift-Knob-for-BMW-E46-3-Series
http://www.bimmian.com/elements/product.htm/showcase/USK/ML_011.jpg

High Gloss Black BMW Automatic Shift Knob
http://images.esellerpro.com/2493/I/132/bmw_pictures_E90_In_Waehlhebel_Diamant_p.jpg

[TomTomTuning]

Is the E92 "style" shark fin too cheesy? Lol
It's a cheap eBay knock off.

9513
9514
9515

[Imola.ZHP]

Subbing...

Shark fin looks fine to me, but is it functional? Personally if it isn't functional, I wouldn't have it on my car, but thats just me.

As for the auto shift knob, I love the "new" style knob, but it seems like I saw it somewhere on e46F in an e46 (of course) and it just looked way too big/tall, perhaps they didn't have it installed right and/or perhaps there is a way to cut it down to not make it look so out of place. I think an inch shorter would have made all of the difference.

[TomTomTuning]

Subbing...

Shark fin looks fine to me, but is it functional? Personally if it isn't functional, I wouldn't have it on my car, but thats just me.

As for the auto shift knob, I love the "new" style knob, but it seems like I saw it somewhere on e46F in an e46 (of course) and it just looked way too big/tall, perhaps they didn't have it installed right and/or perhaps there is a way to cut it down to not make it look so out of place. I think an inch shorter would have made all of the difference.
Yea, the fin is non-functional. I loved it on my 335i E92 I had so I figured Id give it a try on the E46. IT was only $6 bucks so... ;)

I wish the car was manual, they're so many awesome manual shift knobs I like it.
I went with Auto just because if my SO ever needs to use my car for pleasure or emergency, she doesn't drive stick.
However I really think the driving experience of the ZHP would be 10x better if it were manual.

Back to the shift knobs, I agree. I think the "new style" knobs sit high on the shifter. I think there's two different versions but the commonly retrofitted knob is the one shown in the photo I posted.

I'm still not sure what knob I'll get but It'll definitely be some sort of OEM BMW knob. Id like to keep it under $100.

[E_Rak]

I would take this knob if you wanted a plug and play, just plasti-dip the silver bit black.

http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Interior/Shifter/ES1832941/

If you feel like doing some dirty work then totally retrofit an M5 SMG knob... would look sweet in the ZHP interior... I think. :dunno

http://www.ecstuning.com/BMW-E60-M5-S85_5.0L/Interior/Shifter/ES47945/

[TomTomTuning]

Here are better photos of the Shark Fin...

http://i.imgur.com/OzcyGiOh.jpg
http://i.imgur.com/qNHXsich.jpg
http://i.imgur.com/efRa1zzh.jpg
http://i.imgur.com/4LZy6abh.jpg
http://i.imgur.com/JMkLp5Ch.jpg
http://i.imgur.com/SIKcBtMh.jpg

[Tnhl1989]

I just drove in a brand new '13 M3 with the smg knob and I totally feels like it is out of place in that car. Just my opinion though.

I do like the new automatic shift knobs. There should be some retrofit work for those on e46f.

[TomTomTuning]

I just drove in a brand new '13 M3 with the smg knob and I totally feels like it is out of place in that car. Just my opinion though.

I do like the new automatic shift knobs. There should be some retrofit work for those on e46f.
I think they just fit, no retrofit work needed.

[TomTomTuning]

Got a few things done today.

- Rear bumper valance wrapped.
- Headlight bezel wrapped.
- Clear headlight protector film.
- Small ZHP emblems installer.
- Bimmian mobile device mount.

I'm not sure if I'm keeping the emblem or not. I wish I got the bigger ones, so I could out them on the left. What do you all think?

I'm pretty happy with the rear bumper valance and head light bezels. It's a bit ricey but it's subtle. Lol

The Bimmian mount definitely causes my trim to be loose

Also my TRS E46 Retro-Quick System projectors arrived. I just need to get some epoxy for the shrouds before I begin.

9525
9526
9527
http://img.tapatalk.com/d/13/07/19/6ypezyny.jpg

[Vas]

Any chance you got a link to the trs retrofit ?

[TomTomTuning]

Any chance you got a link to the trs retrofit ?
I got projectors and brackets only.

http://www.theretrofitsource.com/product_info.php?products_id=254

[Vas]

Looking forward to your install and review. Might do this with my zkw lights.

[TomTomTuning]

Looking forward to your install and review. Might do this with my zkw lights.

I plan to do a DIY. Not many people know about this kit, so if it works well then it's a great option for ZKW retrofit.

Supposedly it's a bolt on kit... However it did not come with any institutions, just a bag of hardware.

[Vas]

I used one of their kits before and did a custom retrofit on another car I own.

I heard about this kit but never saw anybody do the diy. Good luck :-)

[QC_ZHP]

Looking good Tom. I've been on the fence about picking up a shark fin for looks as well. Check your PM btw.

[johnrando]

I have the same Bimmian mount. wrt the zhp logo, I don't mind it there.

[TomTomTuning]

I have the same Bimmian mount. wrt the zhp logo, I don't mind it there.
Is your trim loose and a slight gap between the two pieces?

[johnrando]

Slightly yes. It seats fairly well but it is looser.

[Imola.ZHP]

Diffuser and headlight shrouds look great IMO!

I'm confused about the retrofit, are these for your "flash to pass" center bowls?

I just upgraded to ZKW lenses, love them! If these are to swap out for your current projectors, are there any benefits other than the ZKW lens? The lenses themselves were just $40, wouldn't that have been less expensive? Also, aren't ZKW bowls susceptible to melting?

[TomTomTuning]

Diffuser and headlight shrouds look great IMO!

I'm confused about the retrofit, are these for your "flash to pass" center bowls?

I just upgraded to ZKW lenses, love them! If these are to swap out for your current projectors, are there any benefits other than the ZKW lens? The lenses themselves were just $40, wouldn't that have been less expensive? Also, aren't ZKW bowls susceptible to melting?
ZHP headlights typically use a ZKW projector, the bowl is made out of plastic and they get burnt (see below) and reduce your light output.
So I'm retrofitting different projectors that come with a metal bowl. Until recently the retrofit was a custom job that required lots of hacking and cutting, you could pay a shop to do it but it was expensive... So hopefully this kit works well because it's super cheap and supposedly very easy to do.

Burnt Bowl:
https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcSZpGUwps2u5FWAapf4VvmnraY_ju4yL kfFAAr7Cv2fFHIIn3pQ8w

[Imola.ZHP]

ZHP headlights typically use a ZKW projector, the bowl is made out of plastic and they get burnt (see below) and reduce your light output.
So I'm retrofitting different projectors that come with a metal bowl. Until recently the retrofit was a custom job that required lots of hacking and cutting, you could pay a shop to do it but it was expensive... So hopefully this kit works well because it's super cheap and supposedly very easy to do.


Are you sure you have burned ZKW bowls and not metal AL bowls already? I realize you have an '04, is there a definitive date on the change? My early early early 2003 has AL headlights and bowls (metal, unmelted) and I just swapped the lenses for ZKW's, $40. I guess you'll find out when you pull them apart!

[TomTomTuning]

Are you sure you have burned ZKW bowls and not metal AL bowls already? I realize you have an '04, is there a definitive date on the change? My early early early 2003 has AL headlights and bowls (metal, unmelted) and I just swapped the lenses for ZKW's, $40. I guess you'll find out when you pull them apart!
I'm not sure if there's a definitive time frame to when they used ZKW projectors but I know my light output is horrible, so it's safe to say mine are burnt.
But we'll find out in a few days... lol

[QC_ZHP]

Does anyone know what brand CSL reps are on his car? Tom said he is unsure and I'm wondering if you guys may know.

[johnrando]

I'd imagine the only way to tell it to remove one and look to see what's stamped on the inside.

[TomTomTuning]

I'd imagine the only way to tell it to remove one and look to see what's stamped on the inside.
I plan on doing that this weekend, so I can clean the wheel wells and inner wheels. So I'll reply back with details once I do that. :)

[QC_ZHP]

Awesome, thanks Tom.

I plan on doing the same this weekend as well. I have 2 bottles of SONAX so hopefully I can get them looking brand new (minus the curb rash). Saw your post on r/bmw on reddit btw!

[WOLFN8TR]

Tom you are missing the most important mod for you Auto ZHP! Sprint Booster

[TomTomTuning]

Tom you are missing the most important mod for you Auto ZHP! Sprint Booster
I've been considering it, believe me! haha

I was thinking about it last night, I don't want to go to crazy on the mods on this car because I really do wish it was manual. So who knows what the plans will be.

[johnrando]

Well, you could just get the SB w/o the panel plate, so (a) it could be easily removed, (b) you could keep it installed but turn it off so it wouldn't be a mod and (c) you could use it on another non-M3 E46 if needed. Just offering other suggestions. :biggrin

[TomTomTuning]

Installed the Orion V2's I got from Chris. They look 10x better then the CCFL AE's I had before, way brighter.

9568

[Stigissimo]

oh boy do those look good. I'm thinking sweet sig pic with those!

[Avetiso]

I'm usually not a fan of the slight blue tint of the Orions, but on a black car, the contrast is amazing.

[johnrando]

Looks great! :thumbsup

[HokieZHP]

I'm usually not a fan of the slight blue tint of the Orions, but on a black car, the contrast is amazing.

When I was buying them new I almost went with pure white but then saw pictures of them on a black car and it grew on me. Love the 6000k color.


They look great Tom! Glad you got them and are happy with them!


Sent from my iPhone using Tapatalk 2

[TomTomTuning]

Yea, I'm really happy with the Orion's.

Getting some RCR tails soon, screw trying to find the all read inner's... LOL
Also thinking about a Arqray, not 100% sure yet.


I wish the exhaust was a bit more deeper/louder.
So I'm starting to research exhaust stuff... ;)

[BCS_ZHP]

You need HokieZHP's Magnaflow exhaust system, let the animal get out

[TomTomTuning]

You need HokieZHP's Magnaflow exhaust system, let the animal get out
To far and shipping would be $$$. :(

Some videos I've watched on YouTube sound great, others sound way to loud and raspy.

[TomTomTuning]

BMW Performance intake installed. Although it had a couple scuffs, this thing was never used, even had a brand new OEM filter in it!
Sounds great by the way!!!

9575

[johnrando]

Glad that worked out. Great modding going on w/your car! What's next? Cough cough *oem strut bar!* cough. :biggrin

[HokieZHP]

To far and shipping would be $$$. :(

Some videos I've watched on YouTube sound great, others sound way to loud and raspy.

Shipping wouldn't be too terrible. I can get you a quote if you'd like.


Sent from my iPhone using Tapatalk 2

[TomTomTuning]

Glad that worked out. Great modding going on w/your car! What's next? Cough cough *oem strut bar!* cough. :biggrin
Haha, I really want a strut bar but they're $500 on the low end. Who knows maybe I'll get lucky again.


Shipping wouldn't be too terrible. I can get you a quote if you'd like.

Sent from my iPhone using Tapatalk 2
Yea, why not. Zip: 17011

[TomTomTuning]

Just won a used M3 dead pedal (kick panel) on eBay for 1¢, shipping was just a few bucks. I also ordered some eBay ///M Auto pedals as well.

Still haven't decided on a shifter.

[Pip]

Just won a used M3 dead pedal (kick panel) on eBay for 1¢, shipping was just a few bucks. I also ordered some eBay ///M Auto pedals as well.

Still haven't decided on a shifter.

Awesome. Not a ton of options for the auto shifters. I personally think the performance shifter is the best looking.

[TomTomTuning]

Awesome. Not a ton of options for the auto shifters. I personally think the performance shifter is the best looking.
Yea, now with the "silver" pedals, I'm thinking the performance shifter will be the route I'll go.

[WOLFN8TR]

Just won a used M3 dead pedal (kick panel) on eBay for 1¢, shipping was just a few bucks. I also ordered some eBay ///M Auto pedals as well.

Still haven't decided on a shifter.

Good luck with the Auto pedals, hopefully they fit. Mine all fit except the brake pedal, the holes were drilled wrong. Got a photo or Seller info?

[TomTomTuning]

Good luck with the Auto pedals, hopefully they fit. Mine all fit except the brake pedal, the holes were drilled wrong. Got a photo or Seller info?
The holes were drilled wrong on the new pedal or you drilled the holes wrong on the factory pedal? :(

The seller only had one, there's a few others on eBay but not as cheap as the one I got.
It's stock on an M3 but It's this same exact part: http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/ES112874/

[WOLFN8TR]

My dead pedal and gas pedal were ok, the brake pedal wasn't even close. The eBay seller from HK refunded my money after seeing the photos I took. FREE Pedals for me!

9581

9582

9583

9584

If you look at the bottom two holes they should of been drilled 1/4" higher towards the rubber insert like these.

http://img.tapatalk.com/d/13/07/25/qemenyna.jpg

http://img.tapatalk.com/d/13/07/25/a7etahum.jpg

[TomTomTuning]

Ah gotcha, hopefully I dont run into that problem.

Here's the one I ordered, it was cheaper on Amazon.
http://www.amazon.com/gp/product/B0028LHK02/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

[johnrando]

More great finds, GL!

[QC_ZHP]

You sir are the Ebay hunter! I have to start browsing for deals.

[TomTomTuning]

So the rear of my car really sinks when theirs 1-2 people in the back seats, so much that my tires rub when I hit a bump... ANNOYING!
The ride height also seems lower in the back but that could be normal, I don't know.

I'm thinking the rear shocks are toast. If I replace the shocks/struts I'm not sure if that will even out the ride height but I wouldnt mind lowering it just a smudge. I hope new rear shocks stiffen up the suspension and helps prevent the tires from rubbing. Rolling the fenders a bit will also help.

Time to do some research on springs/shocks.

[Tnhl1989]

We have a family fender roller. Contact Dane or find the forum regarding it.

Yes the rear is usually lower than the fronts.

Sent from my iPhone using Tapatalk 2

[TomTomTuning]

We have a family fender roller. Contact Dane or find the forum regarding it.

Yes the rear is usually lower than the fronts.

Sent from my iPhone using Tapatalk 2
I've contacted Dane already, just waiting on a shipping quote.
I also just found out I have a friend locally that has one, so I may go that route.

[Johnmadd]

The ride height... if you look at most cars the fender lips are lower in the back.

[illirep]

Hey - want to warn you that the coupe and sedan dead pedals are different. If you bought an m3 one for your sedan, it will not work.

Bill

[TomTomTuning]

Hey - want to warn you that the coupe and sedan dead pedals are different. If you bought an m3 one for your sedan, it will not work.

Bill
I had a feeling they might be different but for the price I paid I'm not too worried. Maybe I can remove the ///M dead pedal and put it on my kick panel, we'll see.

[danewilson77]

We have a family fender roller. Contact Dane or find the forum regarding it.

Yes the rear is usually lower than the fronts.

Sent from my iPhone using Tapatalk 2

I think I owe someone a quote for shipping.

Sent from my HTC6435LVW using Tapatalk 2

[E_Rak]

Hey - want to warn you that the coupe and sedan dead pedals are different. If you bought an m3 one for your sedan, it will not work.

Bill

I was under the impression that the M3 dead pedal was a direct bolt on...

[TomTomTuning]

I was under the impression that the M3 dead pedal was a direct bolt on...
We'll find out tomorrow when it arrives. :)

[johnrando]

Two types of pedals. A true M3 pedal is a swap out. There are also pedals you can just screw on top of the existing. I bought the one to screw of top of the existing. Mine aren't M3 ones of course.

http://i1214.photobucket.com/albums/cc481/johnrando/2012-03-16081737.jpg (http://s1214.photobucket.com/user/johnrando/media/2012-03-16081737.jpg.html)

[TomTomTuning]

Just won a used M3 dead pedal (kick panel) on eBay for 1¢, shipping was just a few bucks. I also ordered some eBay ///M Auto pedals as well.

Still haven't decided on a shifter.


Hey - want to warn you that the coupe and sedan dead pedals are different. If you bought an m3 one for your sedan, it will not work.

Bill
I received the dead pedal yesterday and cleaned it up today, It appears it will NOT fit.

There's a coupe/convertible pedal and then a Sedan/Wagon pedal.
Since mine was off of an M3, it's for the Coupe/Convertible.


I was under the impression that the M3 dead pedal was a direct bolt on...
If it's off of an M3, it will not fit. I learned that the hard way.


Two types of pedals. A true M3 pedal is a swap out. There are also pedals you can just screw on top of the existing. I bought the one to screw of top of the existing. Mine aren't M3 ones of course.

http://i1214.photobucket.com/albums/cc481/johnrando/2012-03-16081737.jpg (http://s1214.photobucket.com/user/johnrando/media/2012-03-16081737.jpg.html)
In addition to a true M3 pedal, they also have an identical one for the Sedan/Wagon's.


I will most likely put this M3 Kick Panel - Dead Pedal up for sale soon.
My factory kick panel is cracked, so I will just purchase a new M3 pedal for Sedans.

Black Sedan ///M pedal part number is: 51437902389
Black Coupe ///M (M3) pedal part number is: 51432695411

Also, here's a DIY: http://www.e46fanatics.com/howto/howtodetail.php?howto_id=16

[TomTomTuning]

OEM Euro clear corner and clear side markers arrived today. Picked up the set from ECSTuning. They came with the light sockets and amber bulbs.

9678

[TomTomTuning]

RCR Depo tail lights arrived today.
Also, if you look closely you'll see I installed the backup camera. I sill need to route the RCA cable to the head unit though (Eonon D5150).

9854

[johnrando]

:like

[Pip]

Looks great Tom! I'm interested in installing a backup camera with my Enco as long as it looks OEM.

[TomTomTuning]

Looks great Tom! I'm interested in installing a backup camera with my Enco as long as it looks OEM.
It's pretty discrete, I bet most people will not even realize it's there unless I pointed it out.



I love the R/C/R tails, much better then the LED EE's I had. It goes well with the Euro clear corners and Euro Side Markers.

[Johnmadd]

Looks good Tom :thumbsup

[TomTomTuning]

Looks good Tom :thumbsup

Thanks bro, I was sold on the tails when I seen everyone's car at Bimmer Fest. Lol


Sent from my iPhone using Tapatalk 2

[WOLFN8TR]

ZHP is lookin' good Tom! I have relatives in PA, Altoona and Harrisburg.

[jayjay_dee]

late to this thread...

you did a very good job with your ZHP, except for the zhp logo, lol...

[TomTomTuning]

I just did the TRS Projector Retrofit, it's a cheap solution to burnt ZKW bowls.
Also installed 6000K HID bulbs, figured it would match the angel eyes and my fogs a bit better.
I would have preferred 5000K but the site I got these from, did not have 5000K.

I did a little DIY as well: http://www.zhpmafia.com/forums/showthread.php?10787-DIY-The-Retrofit-Source-(TRS)-Retro-Quick-System-ZKW-Projector-Retrofit

http://i9.photobucket.com/albums/a98/boostd240/E46%20TRS%20Retrofit/IMG_8774-15.jpg

[WOLFN8TR]

Paging Tom...:hi

[TomTomTuning]

Tom is checking in... ;)

Let's see, the only real update to the car is I just installed Icon wipers haha. That's about it.

My CCV needs replaced ASAP, I hope to get that done soon

BY the way for the past 6+ years I've had AWD cars, the ZHP is my first non-AWD daily driver and it's horrible in the snow. I was planning to buy snow tires but then I started working from home full time so I don't drive the car often. But during these past few weeks we've gotten a ton of snow and the car was stuck for a majority of that time. Lol


Sent from my iPhone using Tapatalk 2

[WOLFN8TR]

Hey Tom good to see ya back! Hope the ZHP is ok thru all that harsh weather.

[Avetiso]

Welcome back! Don't be a stranger. :)

Sent from my SM-N900T using Tapatalk

[danewilson77]

Nice seeing you around T.

Sent from my SCH-I545 using Tapatalk

[johnrando]

Always good to see members back.

[TomTomTuning]

So, how much should I expect to pay if I had a shop replace my CCV?
Parts don't seem to cost too much, I believe the cost will be mainly labor?

I work from home now, so I don't drive much but I need to get this done ASAP.

Also, is there anything else I should have done while he's in that area?

[Tnhl1989]

I did it in 4 hours. CCV and OHFG. Quick and easy with a lot of room since pulling the oil housing to the side to remove the CCV.

[TomTomTuning]

Id do it myself but I don't have a garage anymore (I live in an apartment building). So I would have to do it in the parking lot or find someone to lend me their space. I probably have all the tools needed but I'm not sure.

[Tnhl1989]

Be sure to have a set of torx. I did it outside in my lot. The quote the person got was about 1200 to do it.

[TomTomTuning]

Yikes, was that at the stealership?

I just called CR's in Newville PA (www.crbimmers.com) and they quoted me roughly $500.
This is the only shop I deal with but I was curious to see what the going rate was from others.

Perhaps I should review the DIY threads to see how much work is involved. I might be able to do it in my lot.

[Vas]

There are plenty of DIY for it actually. I was looking through them since I will be doing the same thing.

The basic stuff is to just replace the ccv and all the hoses with it and the throttle body gasket. If you want to go further, replace the ofhg if its leaking as well as the throttle body boots. Plus clean the iacv and the throttle body and replace the vanos line if it is leaking.

Some people suggest to replace the complete dip-stick tube as well with the updated version.

[TomTomTuning]

There are plenty of DIY for it actually. I was looking through them since I will be doing the same thing.

The basic stuff is to just replace the ccv and all the hoses with it and the throttle body gasket. If you want to go further, replace the ofhg if its leaking as well as the throttle body boots. Plus clean the iacv and the throttle body and replace the vanos line if it is leaking.

Some people suggest to replace the complete dip-stick tube as well with the updated version.
Yea, I figured while I have everything apart I should inspect and replace everything that could be problematic later on.
I'm thinking I might tackle this myself, since money is tight right now.

[LivesNearCostco]

I think replacing my CCV took 6 hours total, including throttle body gasket and cleaning the IACV and TB and dipstick plus changing the dipstick O-ring. In retrospect, if I'd removed my OFH I might have been able to do it all in 4 hours!

[gmurphy]

So, how much should I expect to pay if I had a shop replace my CCV?
Parts don't seem to cost too much, I believe the cost will be mainly labor?

I work from home now, so I don't drive much but I need to get this done ASAP.

Also, is there anything else I should have done while he's in that area?

My bill was around $600 for a complete CCV cold weather kit installed with the updated oil dipstick.


Sent from my iPhone using Tapatalk

[Vas]

How much was the oil dipstick tube ?

[gmurphy]

How much was the oil dipstick tube ?

$142ish 11437565437


Sent from my iPhone using Tapatalk

[TomTomTuning]

My bill was around $600 for a complete CCV cold weather kit installed with the updated oil dipstick.


Sent from my iPhone using Tapatalk
Did that include all the cold weather hoses as well?

I threw all of the (OEM) items in a cart at PelicanParts just to get a rough idea of the cost of the parts, and it came out to $424.50
I bet I could shop around and get better prices. Plus there were cheaper (aftermarket, non-OEM) alternatives as well.

http://i.imgur.com/4M8nbWy.jpg

I wonder if the cold-weather items are needed in Central PA? Besides this past season, our winter are normally not that bad.... Thoughts?

[mbeckel]

May not hurt to pull off your disa and make sure it's good. A new seal on it never hurts

Sent from in the bushes

[QC_ZHP]

Tom

Plug your part #'s into this site and shop around a bit

http://www.furiousmethod.com/

[TomTomTuning]

May not hurt to pull off your disa and make sure it's good. A new seal on it never hurts

Sent from in the bushes
Definitely!


Tom

Plug your part #'s into this site and shop around a bit

http://www.furiousmethod.com/
Thanks Steve, I remembered seeing that site before but I didn't have it bookmarked! ;)

[gmurphy]

Did that include all the cold weather hoses as well?

I threw all of the (OEM) items in a cart at PelicanParts just to get a rough idea of the cost of the parts, and it came out to $424.50
I bet I could shop around and get better prices. Plus there were cheaper (aftermarket, non-OEM) alternatives as well.

http://i.imgur.com/4M8nbWy.jpg

I wonder if the cold-weather items are needed in Central PA? Besides this past season, our winter are normally not that bad.... Thoughts?

Yes everything cold weather


Sent from my iPhone using Tapatalk

[Vas]

I was able to piece everything from ECS for roughly $300

[TomTomTuning]

I was able to piece everything from ECS for roughly $300

Nice, was it all OEM?


Sent from my iPhone using Tapatalk 2

[Vas]

Nice, was it all OEM?


Sent from my iPhone using Tapatalk 2

Yup. All OEM parts.

Basically this kit without the lower throttle body boot
http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Engine/Emissions/ES1905414/

And then I added the oil dipstick tube.

http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Search/SiteSearch/Oil_Dipstick_Tube/ES24265/

[mbeckel]

The ccv repair isn't too hard. Should take about 4-5 hours. FYI, to save your back a lot of trouble, jack the front up and set up jackstands on the jackpads. Lots of bending under the hood.

Sent from in the bushes

[mbeckel]

Bavauto.com has a nice 3 video set on YouTube on the ccv replacement. If you have any questions, shoot me a pm

Sent from in the bushes

[gmurphy]

Just make sure you get everything cold weather :)


Sent from my iPhone using Tapatalk

[WOLFN8TR]

Tom you were looking for a Sprint Booster right?

BMW Sprint Booster 1 Series 3 Series Z4 Auto Transmission SBBM0002S- $200

http://www.ebay.com/itm/BMW-Sprint-Booster-1-Series-3-Series-Z4-Auto-Transmission-SBBM0002S-/131278988970?pt=Race_Car_Parts&hash=item1e90d666aa&vxp=mtr

[TomTomTuning]

Tom you were looking for a Sprint Booster right?

BMW Sprint Booster 1 Series 3 Series Z4 Auto Transmission SBBM0002S- $200

http://www.ebay.com/itm/BMW-Sprint-Booster-1-Series-3-Series-Z4-Auto-Transmission-SBBM0002S-/131278988970?pt=Race_Car_Parts&hash=item1e90d666aa&vxp=mtr

Holy shit it's also 30mins away from me... I will message the seller asap!

Thanks bro!

[WOLFN8TR]

Holy shit it's also 30mins away from me... I will message the seller asap!

Thanks bro!

You Bet! :thumbsup

I just noticed you live in Harrisburg PA, my Uncle lives there. I use to have relatives in Altoona PA also.

You need the Sport Button Console to complete this Mod right? Does this match yours? Do you have heated seats?

http://www.ebay.com/itm/BMW-E46-01-06-M3-sunglass-cigarette-lighter-ashtray-console-Sport-heated-HK-HIFI-/261468971453?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ce0c3e1bd&vxp=mtr

OR

http://www.ebay.com/itm/BMW-E46-M3-Coupe-Center-Console-Switch-Unit-DSC-TPMS-HK-Sport-2001-2006-OEM-USED-/321495700650?pt=Motors_Car_Truck_Parts_Accessories&hash=item4adaa314aa&vxp=mtr

[Hornung418]

You Bet! :thumbsup

I just noticed you live in Harrisburg PA, my Uncle lives there. I use to have relatives in Altoona PA also.

I used to go to Altoona to watch the trains at the Horseshoe Curve as a boy. Loved every minute of it.

Sent from my GS3.

[WOLFN8TR]

I used to go to Altoona to watch the trains at the Horseshoe Curve as a boy. Loved every minute of it.

Sent from my GS3.

Me too!! Good memories...

[WOLFN8TR]

Tom here is another Sprint Booster on eBay!

http://www.ebay.com/itm/Sprint-Booster-SBBM0002S-Sprint-Booster-For-BMW-see-details-/321506048124?pt=Motors_Car_Truck_Parts_Accessories&hash=item4adb40f87c&vxp=mtr

[johnrando]

Nice hunting Gary!

[TomTomTuning]

I appreciate all the help Gary, I will definitely hit you up once I'm ready to do the button mod.

[WOLFN8TR]

I appreciate all the help Gary, I will definitely hit you up once I'm ready to do the button mod.

Welcome...

[TomTomTuning]

The Sprint Booster should be here today!


You Bet! :thumbsup

I just noticed you live in Harrisburg PA, my Uncle lives there. I use to have relatives in Altoona PA also.

You need the Sport Button Console to complete this Mod right? Does this match yours? Do you have heated seats?

http://www.ebay.com/itm/BMW-E46-01-06-M3-sunglass-cigarette-lighter-ashtray-console-Sport-heated-HK-HIFI-/261468971453?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ce0c3e1bd&vxp=mtr

OR

http://www.ebay.com/itm/BMW-E46-M3-Coupe-Center-Console-Switch-Unit-DSC-TPMS-HK-Sport-2001-2006-OEM-USED-/321495700650?pt=Motors_Car_Truck_Parts_Accessories&hash=item4adaa314aa&vxp=mtr
I don't have heated seats (I wish I did) so Id use the second one. I think I might just order this now. ;)
Is $75 a decent price?

[WOLFN8TR]

The Sprint Booster should be here today!


I don't have heated seats (I wish I did) so Id use the second one. I think I might just order this now. ;)
Is $75 a decent price?

Nice!! Hook it up once you get it!

$75 is a decent price. The Button between Speaker & Sport is the TPMS.

Post a photo of the button panel you have currently.

[johnrando]

$75 is OK. I've seen them cheaper, but if you're ready to go, just do it.

[TomTomTuning]

Got it installed, took a quick test drive and it feels great! I'll drive it more tonight for sure.

http://img.tapatalk.com/d/14/09/04/8eru7a9a.jpg

PS: I do have heated seats, I completely forgot... Lol

[WOLFN8TR]

Sweet, told ya it was worth it! Glad you like it.

[WOLFN8TR]

You Bet! :thumbsup

I just noticed you live in Harrisburg PA, my Uncle lives there. I use to have relatives in Altoona PA also.

You need the Sport Button Console to complete this Mod right? Does this match yours? Do you have heated seats?

http://www.ebay.com/itm/BMW-E46-01-06-M3-sunglass-cigarette-lighter-ashtray-console-Sport-heated-HK-HIFI-/261468971453?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ce0c3e1bd&vxp=mtr

OR

http://www.ebay.com/itm/221527231971

Updated for heated seats. I would buy the first one, it also comes with extra parts. The second one would work if you didn't care the button says "Sport". These are the only two on eBay unless you want to spend $200 which is too much.

You just need to find another one that matches your setup plus one additional button. That button can say anything but the "Sport" button is the coolest mod option.

[johnrando]

Glad you like it!

[TomTomTuning]

Roof rack installed but I need to double check the manual and make sure I did it correctly. I didn't notice the bars were different until after I finished, lol.

I need to find time to clean her, she's filthy!

http://img.tapatalk.com/d/14/09/13/uruvujeb.jpg

http://img.tapatalk.com/d/14/09/13/mysezuzu.jpg

[Vas]

If you flip over the bars, they are marked left and right and front and back.

[TomTomTuning]

If you flip over the bars, they are marked left and right and front and back.
Nice, thank you! I was rushing because I wanted to install them on my lunch break. I'll go back after work and fix them.

Now I need to find a road bike (fork mount) bike carrier. Maybe I'll just get the BMW cerrier BMW 82722326514 (http://www.ecstuning.com/Search/Bike/ES2644050/)

[TomTomTuning]

I went back and corrected the bars. I had the front and rear correct but I had to flip them left to right (around).

I'll probably order a fairing soon. :)

[Imola.ZHP]

Nice!

[TomTomTuning]

I ordered this bike carrier BMW 82722326514 (http://www.ecstuning.com/Search/Bike/ES2644050/), found a dealer on eBay that had it for $112 shipped. Next is the Thule fairing but those don't seem to ever go on sale or sell for much cheaper then retail, lol.

I'm about to go out and work on the car today, there's something inside my projector thats casting a big weird shadow on the ground and I'm guessing it's behind the lens. Time to investigate, I also want to figure out why my auto leveling doesn't work anymore.

[TomTomTuning]

Bike rack has been installed now for a while, I'll probably take it off soon, however, since I live in an apartment I'm not exactly sure where I'll store it.

I got some WeatherTech front mats, I'm really loving them.

The fiancé has been driving the car lately, while hers get some work done. She left the gas cap loose after filling the tank, so now I'm getting a check engine light. The gas cap light was on, which is what notified me that she did not tighten the cap but that's off now.

I could really use some winter wheels and tires!!! I'll probably start looking for those soon, it's probably not best to wait till winter to buy them, lol.

[TomTomTuning]

She's filthy and the weather has been so crappy...

http://tapatalk.imageshack.com/v2/14/12/06/2502397f68ae4e056a9762173adcfef4.jpg


Sent from my iPhone using Tapatalk

[NoVAphotog]

Yeah this rain has been annoying...glad it's clearing up tomorrow. Should be a nice day to clean her up...even though she looks damn good as is!

[TomTomTuning]

Yeah, I may wake up early and wash her up. My wheels are the dirtiest they've ever been. I neglected her these past couple months.


Sent from my iPhone using Tapatalk

[WOLFN8TR]

Hey Tom. :hi

My Uncle lives in Harrisburg, he said the weather sucks lately. Did you get any of the DH Fudge?

[TomTomTuning]

Hey Tom. :hi

My Uncle lives in Harrisburg, he said the weather sucks lately. Did you get any of the DH Fudge?
Yeah, we got snow last week and it's been raining all week. Tomorrow should be clear.

A month or so ago I was in Vegas for a few days and then drove to Cali. I loved the weather out there!!!

Haha the sign says "OH, Fudge". I got a quart of chocolate turtle, all their ice cream is great though.


Sent from my iPhone using Tapatalk

[WOLFN8TR]

OH ya, LoL...

That sounds Good!